Haute Decor DCYD0011 Quick Start Manual

48 Inch Collapsible Tinsel Fabric Snowman
1
2. Pull down and
hook center ring
over rod.
1. Insert the upper metal rod
into the small, metal tube
inside the snowman hat as
shown.
2. Pull the circle frame of the
telescopic snowman past the
end of the rod, then insert the
end of the rod through the
center ring of snowman frame.
DCYD0011
3
4
3. Attach the upper metal rod to the
lower metal rod.
4. Insert the lower rod into the stand as
shown.
5. Pull the bottom frame of the snowman
down to the stand and attach the hook
connected to the stand to the center ring
of the snowman frame to hold the snow-
man body down.
6. Insert the snowman arms into
the holes on the sides of the
snowman body, and insert into the
frame as shown.
6
5. Pull snowman
down and attach
hook from stand
to center ring of
snowman frame.
7. Use the optional provided ground stakes
for added stability, if desired.
8. Connect the cable coming from the snow-
man to the adapter. Plug into 120VAC outlet
to light up the item.
7
8