Systembuild Evolution 4632015COM Manual page 14

STEP 7
Assure that your unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
12
AND MUST BE INSTALLED PROPERLY.
(x34)
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
J
"raw surface shown"
Flush the bottom edge of the back panel
with the bottom edge of the bottom (D).
14
12
You
Tube