Audio Menu; Configuration1 Menu - Philips D Line 32BDL4511D User Manual

32BDL4511D
H position
Moves the horizontal position of the
image left or right.
V position
Moves the vertical position of the image
up or down.
Auto adjust
Select to detect and adjust H position, V position, Clock,
Phase automatically.
NOTE: VGA input only.
Screen reset
Reset all settings in the Screen menu to factory preset values.

6.2.3. Audio menu

Picture Balance
Screen Treble
Audio Bass
Configuration 1 Volume
Configuration 2 Audio Out Volume
Option Volume Maximum
Volume Minimum
Mute
Speaker
Sync. Volume
Audio Source
Audio Reset
Balance
Adjust to emphasize left or right audio output balance.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Volume
Adjust the volume.
Audio Out Volume
Adjust to increase or decrease the line out audio output
level.
Minimum volume ≤ Volume ≤ Maximum volume
NOTE: This function will be disabled when Audio Out Sync is
ON.
Volume Maximum
Adjust your own limitation for the maximum volume setting.
Volume Minimum
Adjust your own limitation for the minimum volume setting.
Mute
Turn the mute function on/off.
Speaker
Turn the internal speaker on/off.
NOTE: This function is only availavle when "Audio Out Sync"
is on.
Sync. Volume
Enable/disable audio out (line out) volume adjustability to
sync with internal speakers volume, but PD Internal speaker
sound will be forced to be mute.
Audio source
Select the audio input source.
Analog: audio from audio input.
Digital : audio from HDMI/DVI audio.
Displyport: audio from DP
Audio Reset
Reset all settings in the Audio menu to factory preset values.

6.2.4. Configuration1 menu

0
50
50
20
100
0
Off
On
On
Switch on State
Digital
Select the display status when you connect the power cord
next time.
•
•
•
Panel saving
Choose to enable the panel saving functions and thus reduce
the risk of "image persistence" or "ghost-imaging".
•
•
RS232 routing
Select the network control port.
Choose from: {RS232} / {LAN ->RS232}.
Boot on source
Select the source when booting up.
• Input: select input source when boot up.
• USB Play List: select playlist index for Media Player source.
None: no playlist autoplay function depends on {OPTION}
-> {USB Autoplay}.
28
Picture Switch on State
Screen Panel Saving
Audio RS232 routing
Configuration 1 Boot on Source
Configuration 2 WOL
Option Light Sensor
Human Sensor
Power LED Light
Network Settings
Configuration1 Reset
Factory Reset
{Power off} - The display will remain off when the power
cord is connected to a wall outlet.
{Forced on} - The display will turn on when the power
cord is connected to a wall outlet.
{Last status} - The display will return to the previous
power status (on/off/standby) when removing and
replacing the power cord.
{Brightness} - Select {On} and the image brightness will be
reduced to an appropriate level. The Brightness setting in
the Picture menu will be unavailable when selected.
{Pixel shift} - Select the time interval ({Auto} / {10 ~
900} Seconds / {Off}) for the display to slightly expand
the image size and shift the position of pixels in four
directions (up, down, left, or right).
Last status
RS232
Last Input
Off
Off
Off
On