Introduction Operational Features The JSGCT30 meter is a 30 amp coin or token operated electronic timer. It provides secure, reliable and affordable timing metering solutions for switching up to 30 amps. Standard features include credit save facility, resettable and non-resettable coin counter, dual or single coin operation and the time period may be set in minutes and seconds or hours and minutes.
(see Figure 2). Unplug the cover flying lead from the wall bracket and remove front cover. The JSGCT30 should be mounted on a smooth vertical wall making sure access to the side coin entry is not obstructed. Take care to mount the case level in both the vertical and horizontal axes;...
JSGCT30 Installation and Operating Instructions Service Mode The service mode consists of four settings split in to two functional areas:- 1. Programming credit 2. Audit functions To access service mode remove the coin box, press and release button B (Figure 4) to step to the desired setting number (St.01 to St.04).
JSGCT30 Installation and Operating Instructions St.01 Credit (Fixed Time) Per Coin 1 Sets the amount of credit given by coin sensor 1 (£1 coin, L2 or L4 tokens). Set in HH.MM or MM.SS. St.02 Credit (Fixed Time) Per Coin 2 Sets the amount of credit given by coin sensor 2 (€1, €½, 10p, 20p coins or L1 token)
JSGCT30 Installation and Operating Instructions Operating Instructions To Operate Meter Insert coin/token. The display will briefly show ‘Coin’. The display will then show the remaining credit. If the credit is greater than one hour it will be displayed in hours &...
100 coins of 23mm diameter x 2.5mm thick Service Information The JSGCT30 meter has been designed to provide reliable long-term use for a variety of timing applications. No regular servicing is required, apart from emptying of the cash box. Repairs...
Need help?
Do you have a question about the JSGCT30 and is the answer not in the manual?
Questions and answers