Subscribe to Our Youtube Channel
Related Manuals for HighPoint RocketStor 3112D
Summary of Contents for HighPoint RocketStor 3112D
- Page 1 RocketStor 3112D Dual-Bay 10Gb/s USB 3.2 to SATA Drive Dock Quick Installation Guide V1.00...
-
Page 2: Table Of Contents
Introducing the HighPoint RocketStor 3112D .......... 2 Kit Contents ..................... 2 System Requirement ................2 Board Layout .................... 3 Installing the RocketStor 3112D Drive Dock ..........4 Driver Installation ..................5 Verifying Installation (Windows) .............. 5 Verifying Installation (Linux) ..............6 Verifying Installation (macOS) .............. -
Page 3: Introducing The Highpoint Rocketstor 3112D
Introducing the HighPoint RocketStor 3112D The RocketStor 3112D is a USB 3.2 10Gb/s drive dock with two dedicated SATA drive bays, and a single USB Type-C host connector. The two drive bays can support industry standard 2.5" & 3.5" SATA hard drives and SSDs, and are powered by dedicated 6Gb/s SATA controllers. -
Page 4: Board Layout
Board Layout Power LED SATA Connection Disk LED Disk LED External power port, DC Type C Connection 12V/5A... -
Page 5: Installing The Rocketstor 3112D Drive Dock
Installing the RocketStor 3112D Drive Dock 1. Carefully insert the SSDs or HDDs into the drive bays. 2. Connect the RocketStor 3112D to the host computer using the included USB Type-C to Type-C cable. 3. Connect the power supply to the RocketStor RS3112D. -
Page 6: Driver Installation
Linux Platforms The RocketStor 3112D is natively supported by Linux v3.10.0 and later (no driver installation is required). Mac Platforms ： The RocketStor 3112D is natively supported by macOS10.12.6 and later (no driver installation is required). Verifying Installation (Windows) 1. Open Device Manager. -
Page 7: Verifying Installation (Linux)
Verifying Installation (Linux) 1. Open terminal and enter the following command: lsusb 2. If the driver is installed properly, two “RS3112D” entry should be displayed. -
Page 8: Verifying Installation (Macos)
Verifying Installation (macOS) 1. Access the System Information app, and click on USB under Hardware. 2. Verify if the drive is installed properly for the “RS3112D”. -
Page 9: Fcc Part 15 Class B Radio Frequency Interference Statement
FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 10: Customer Support
Customer Support If you encounter any problems while utilizing this or any other HighPoint Technologies, Inc. product, feel free to contact our Customer Support Department. Web Support: https://www.highpoint-tech.com/support-and-services HighPoint Technologies, Inc. websites: https://www.highpoint-tech.com © Copyright 2021 HighPoint Technologies, Inc. All right reserved.
Need help?
Do you have a question about the RocketStor 3112D and is the answer not in the manual?
Questions and answers