Troubleshooting Guide; Specifications - Panasonic CT-2701 Owner's Manual

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
TV does not operate
Poor sound or No sound
Poor picture or No picture
Poor reception on some channels
Poor color or no color
Picture wobbles or drifts
No CATV reception
Horizontal or diagonal bars on screen
No reception above channel 13
No Remote operation
TV shuts off
Cannot see closed caption
Display is not shown in your language

SPECIFICATIONS

AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Horizontal resolution:
Audio Power Output Rating:
Speaker:
Tuner Type: 181 Channel, Quartz PLL Frequency
Remote Control: Infrared, Direct Access, 2 x AA batteries
ACCESSORIES
Remote Control
Batteries (AA) x 2
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems, tune to another station.
• Check sound adjustments (VOLUME and MUTE).
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to receive desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Adjust antenna.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another station.
• Check antenna connections, adjust or re-direct antenna.
• Check for sources of possible interference.
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV (within 15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the Remote and the TV.
• Make sure the power cord is plugged in.
• No broadcast on station tuned.
• Timer is set.
• Power interrupted.
• TV station experiencing problems or program tuned is not closed
captioned. Try another channel.
• Check CATV connection or VHF/UHF antenna, reposition or rotate
antenna.
• Select the Closed caption.
• Select proper language in the SET UP mode.
120V, 60Hz
125 Watts
IC Solid state
27" (measured diagonally)
260 lines
1.5 + 1.5 Watts
2" x 3-1/2" Full Range, 8 ohms x 2
Synthesized
(supplied)
POSSIBLE SOLUTIONS
Receiving Channels:
VHF
UHF
CATV
Antenna Input Impedance: 75 Ohm (VHF/UHF/CATV) Coaxial Input
Inputs/Outputs: S-Video: Y-Input:
C-Input:
Video:
Audio:
Antenna:
Dimensions:
25-9/16" (W) x 19-11/16" (D) x 22-1/2" (H)
Weight:
2-13
14-69
1-125
1.0 Vp-p/75 ohms
0.3 Vp-p/75 ohms
In(RCA) 1.0 Vp-p/75 ohms
Out(RCA) 1.0 Vp-p/75 ohms
In(RCA)-8 dBm/50 K ohms
Out(RCA)-8 dBm/1 K ohms
VHF/UHF IN 75 ohms coaxial
80.5 Ibs
11