Microrouter 900I Switch Settings - Compatible Systems MicroRouter 900i Installation Manual

32 Appendix C - Light Patterns and Test Switch Settings

MicroRouter 900i Switch Settings

0 Normal Operation
1 RAM Test*
2 Ethernet Test*
3 Unused*
4 Unused*
5 Erase Flash ROM (OS and configuration)
6 Flash ROM Test*
7 Manufacturing Burn In*
8 Serial Test*
9 Allow letmein password for 5 minutes after powerup
M Caution: Settings marked with an asterisk may erase your Flash
ROM. Please do not use these settings without first contacting
Compatible Systems Technical Support. Very few units experience
hardware failures; almost all problems can be traced to telco line
problems and/or incorrect configuration.