Writing The Print Information In The Card (Dpof Setting) - Panasonic Lumix DMC-LC40 Operating Instructions Manual

Writing the Print Information in the Card
(DPOF Setting)
PLAY
DELETE
PROTECT
DPOF
SLIDE SHOW
AUDIO DUB.
RESIZE
SELECT:
DPOF SET THIS
SELECT:
SET:
DPOF SET THIS
SELECT:
COUNT:
SET:
66
SETUP
SINGLE
MULTI
CANCEL
INDEX
SET EXIT
EXIT:
EXIT:
It is possible to write print information (DPOF
data) on the card with the images that you
want to print and the number of sheets.
DPOF is an abbreviation of Digital Print Order
Format. With the DPOF corresponding
system, you can add print information to the
images on the memory card.
[Preparation]
• Set the operational mode dial to playback [
[Single copy setting]
1
Press the [MENU] button.
2
Press 3/4 to select [DPOF] and then
press 1.
3
Select [SINGLE] and then press 1.
4
Press 2/1 to select 1 image.
5
Press the [REVIEW/SET] button.
• If the DPOF has already been set and only
the number of sheets is changed, skip step
5.
6
Press 3/4 to select the number of
sheets.
• The number of sheets can be set from 1 to
99.
7
Press the [MENU] button twice.
• The menu will disappear.
[To cancel]
Perform steps 1-5, 7 of the [Single copy
setting].
].