Accessories; Installation; Removing The Top Cover - Alpine R2-A75M Owner's Manual

ACCESSORIES

• Self-Tapping Screw ..........................................................4
• Hexagon Wrench ......................................................1 SET

INSTALLATION

Due to the high power output of the R2-A75M/
R2-A60F considerable heat is produced when the
amplifier is in operation. For this reason, the
amplifier should be mounted in a location which
will allow for free circulation of air, such as inside
the trunk. For alternate installation locations, please
contact your authorized Alpine dealer.
1. Using the amplifier as a template, mark the four
screw locations.
2. Make sure there are no objects behind the
surface that may become damaged during
drilling.
3. Drill the screw holes.
4. Position the R2-A75M/R2-A60F over the screw
holes, and secure with four self-tapping screws.
Self-Tapping Screws (× 4)
(included)
Self-Tapping Screws (× 4)
(included)
Holes (× 4)
R2-A75M
Holes (× 4)
R2-A60F
REMOVING THE TOP
COVER
To use the top inner panel, remove the top cover.
Top cover
Top cover
Hexagon wrench
(included)
R2-A75M
Hexagon wrench
(included)
R2-A60F
3
-EN