Usb/Ipod - Kenwood KMM-BT408 Instruction Manual

Radio
[TI] [ON]: Allows the unit to temporarily switch to Traffic Information if
available ("TI" indicator lights up) while listening to all sources except in
AM/SW1/SW2. ; [OFF]: Cancels.
[PTY SEARCH] 1 Turn the volume knob to select the available Program Type (see the
following "Available Program Type for [PTY SEARCH]"), then press the
knob.
2 Turn the volume knob to select the PTY language ([ENGLISH]/
[FRENCH]/[GERMAN]), then press the knob.
3 Press S / T to start searching.
[CLOCK]
[TIME SYNC] [ON]: Synchronizes the unit's time to the Radio Data System station time. ;
[OFF]: Cancels.
• [MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH] is selectable only
when the band is FM1/FM2/FM3.
• If the volume is adjusted during reception of traffic information, alarm or
news bulletin, the adjusted volume is memorized automatically. It will be
applied the next time traffic information, alarm or news bulletin is turned
on.
Available Program Type for [PTY SEARCH]
[SPEECH]:
[NEWS], [AFFAIRS], [INFO] (information), [SPORT], [EDUCATE], [DRAMA], [CULTURE],
[SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN], [SOCIAL], [RELIGION],
[PHONE IN], [TRAVEL], [LEISURE], [DOCUMENT]
[MUSIC]:
[POP M] (music), [ROCK M] (music), [EASY M] (music), [LIGHT M] (music),
[CLASSICS], [OTHER M] (music), [JAZZ], [COUNTRY], [NATION M] (music), [OLDIES],
[FOLK M] (music)
The unit will search for the Program Type categorized under [SPEECH] or
[MUSIC] if selected.

USB/iPod

Connect a USB device
USB input terminal
USB type A cable*1
(general product)
The source changes to USB automatically and playback starts.
Connect an iPod/iPhone
USB input terminal
KCA-iP103*2 (optional accessory)
or accessory of the iPod/iPhone*1
The source changes to iPod USB automatically and playback starts.
• You can also connect iPod/iPhone via Bluetooth. (Page 14)
*1 Do not leave the cable inside the car when not in use.
*2 KCA-iP103: Lightning type
USB device
iPod/iPhone
9
ENGLISH