Panasonic Lumix DMC-FH7 Owner's Manual page 41

[Calibration]
Calibration is not done if correct position is not touched. Touch the [ i ] mark again.
•
~ [Language]
•
If you set a different language by mistake, select [~] from the menu icons to set the desired
language.
[Demo Mode]
DEMO
•
The Stabilizer function is switched between [On] and [Off] every time [Stabilizer] is touched
during the [Stabilizer Demo.].
•
[Stabilizer Demo.] is an approximation.
•
[Auto Demo] is not output to the television.
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1
Touch [Start].
2
Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
•
A message is displayed once the
position is set.
3
Touch [End] to finish.
Set the language displayed on the screen.
Displays the amount of jitter the camera has detected. ([Stabilizer
Demo.])
The camera's features are displayed as slide shows.
([Auto Demo])
[Stabilizer Demo.]:
A Amount of jitter
B Amount of jitter after correction
[Auto Demo]:
[ON]/[OFF]
- 41 -
Basic
A B