Advanced Functions; Backlight Compensation Function; Adjusting White Balance - Panasonic SV-AV10 Operating Instructions Manual

1
PLAY
MPEG4 VOICE
PICTURE
2
1
PLAY
MPEG4 VOICE
PICTURE
2
22
1

Backlight Compensation Function

This prevents a recording subject from being recorded too dark in
backlight. (Backlight is the light that shines from behind a recording
1,2
subject.)
1
Set the Operation Mode to [REC>>MPEG4] or
[REC>>PICTURE]
REC
2
Move the Jog Lever up for about 1 second.
≥The [
To Resume Normal Recording
Move the Jog Lever up for about 1 second.
≥When the Backlight Compensation Function is activated, the entire
screen becomes brighter.
≥Turning the power OFF will release this function.
≥It is not possible to use Horizontal Stripes Reduction Mode when this
mode is set to ON.
≥The backlight may not be sufficiently compensated for in dark places.
≥The Backlight Compensation Function cannot be set or released while
recording.

Adjusting White Balance

The SD Multi AV Device adjusts White Balance automatically. However,
depending on the scene or light condition, the Automatic White Balance
may not be able to bring out natural colors. In such cases, the white
balance can be adjusted manually.
1
Set the Operation Mode to [REC>>MPEG4] or
1
[REC>>PICTURE]
2
Point the SD Multi AV Device at a full-screen white
1,3 subject (e.g. white paper).
3
Keep pressing the center of the Jog Lever
1
[
3
To Resume Automatic Adjustment
REC
Press down the center of the Jog Lever until the [1] Indication 2
disappears.
≥You may not be able to achieve correct White Balance adjustment
manually under weak illumination. (In this case, the [1] Indication
flashes.)
≥Turning the power OFF will release the adjusted White Balance setting.
≥This mode cannot be set or released while recording.
≥Adjustment of White Balance is effective under the following
conditions.
1
-When recording under reddish lighting (halogen light bulb,
incandescent light bulb, etc.).
-When recording a picture of mono-tone color.
-When recording under multiple light sources.

Advanced Functions

.
1
ª ] Indication 2 is displayed.
.
1
] Indication is displayed.
2
until the
3