Advertisement
Capture SC76
Please read these instructions carefully and retain them
Space Copenhagen
for future reference to ensure that the product is used
correctly. For your own safety, please study each step of
2022
this instruction manual first. &Tradition is not responsible
for any faults or damages caused by not following these
instructions correctly. Do not modify this product in
any way.
Contents
A - Hanger
A
B - Mounting plate (pre-mounted on the hanger)
C - Screws x 6
D - Wall plug x 6
E - Set screws x 5 (pre-mounted on the hanger)
F - Allen key
*Please note that the wall plugs (D) are only intended
B
for stone walls, if the product is going to be hung on a
different type of wall, please use plugs that are specialized
for this.
Safety precautions
C
D
- Dispose of plastic bag from packaging and do not allow
children to play with it.
- The hanger is only intended for indoor use.
Cleaning instructions
E
F
Powder coated metal: It is recommended only to use a
soft dry cloth to clean powder coated surfaces but in case
more severe cleaning is necessary, a soft cloth wrung
in lukewarm water can be carefully applied. Always dry
immediately after cleaning with a soft dry cloth. Avoid
using abrasive cleaning agents or aggressive cleaning
detergents on powder coated surfaces as this may
permanently damage the surface.
Lacquered wood: For daily care it is recommended to
dust the furniture with a soft cloth. Lacquered wood can
be cleaned with a soft cloth wrung in a mild solution of
lukewarm water and a universal cleaning detergent. Avoid
use of abrasive cleaning agents and aggressive cleaning
detergents as this will damage the surface of the lacquered
wood. Avoid placing wooden furniture in direct sunlight,
excessive heat or humidity.
Step 1
Remove the mounting plate (B) from the hanger (A)
by loosening the set screws (E) clockwise with the
Allen key (F).
Step 2
Place the mounting plate (B) in the desired space on
the wall. Make sure it is leveled by using a spirit level.
Mark hole placement, remove the mounting plate
and drill holes on the marked spots.
Insert the wall plugs (D) and fasten the mounting
plate with the screws (C).
Advertisement
