&Tradition IN BETWEEN SK3 User Instructions

&Tradition IN BETWEEN SK3 User Instructions

Advertisement

A
B
C
D
U S E R I N S T R U C T I O N S
I N BET W EEN
S A M I K A L L I O
B Y
2014
Congratulations on choosing this original In Between table, designed
in 2014 by Sami Kallio. We hope you will enjoy using this product and
follow these instructions to ensure correct assembly. If you have any
questionsor comments, please do not hesitate to contact us by mail on:
info@andtradition.com
C O N T E N T S
A - Table top
B - Table leg × 3 (SK3) / × 4 (SK4)
C - Screw × 12 (SK3) / × 16 (SK4)
D - Allen Key
Unpack the table and ensure all parts pictured are included.
Please read these instructions carefully and retain them for future reference to ensure
that the table is used correctly. For your own safety, please study each step of this
instruction manual. &tradition is not responsible for any faults or damages caused by not
following these instructions correctly.
S A F E T Y P R E CAU T I O N S
- Dispose of plastic bag from packaging and do not allow children to play with it.
- The table is only intended for interior use.
- Handle table tops with care in order not to scratch surfaces.
- Power tools can be used to assemble the table. Be careful not to overtighten or damage
screw or thread.
- Two or more persons are needed to turn table around once assembled.
C L E A N I N G I N S T R U C T I O N S
- For daily care, dust table with a soft dry cloth.
- Cleaning can be done using a soft cloth wrung in lukewarm water following the wood
grains and dried immediately with a soft cloth, also following the wood grains.
- Avoid use of cleaning detergents and abrasive cleaning agents as they may damage the
surface of the oiled wood. Avoid placing wooden furniture in direct sunlight, excessive heat
or humidity.
S K 3 & S K 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IN BETWEEN SK3 and is the answer not in the manual?

Questions and answers

Summary of Contents for &Tradition IN BETWEEN SK3

  • Page 1 U S E R I N S T R U C T I O N S I N BET W EEN S K 3 & S K 4 S A M I K A L L I O 2014 Congratulations on choosing this original In Between table, designed in 2014 by Sami Kallio.
  • Page 2 S T E P 1 Place table top (A) upside down. Please make sure to place table top on soft surface, so that table top will not be damaged during assembly. Place legs (B) on table top, aligning each leg with all four holes as illustrated. S T E P 2 Place the screws (C) in the appointed holes and fasten with Allen Key (D) Repeat the task for the remaining legs (B).

This manual is also suitable for:

In between sk4

Table of Contents