Dividing A Scene To Partially Delete (Iframe) - Panasonic HDC-SD40 Owner's Manual

Dividing a scene to partially delete (iFrame)

Divide the iFrame scene, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥ Change the mode to
[iFrame]. (l 36)
1
Select the menu.
: [EDIT SCENE] # [SPLIT&DELETE
2
Select the scene you wish to divide using the cursor button and
press the ENTER button.
3
Select to set the dividing point.
≥ Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point
where you want to divide the scene. (l 63)
≥ Set to at least 2 seconds for the portions to be
deleted and least 3 seconds for the portion that
is to remain.
4
Select the part for deletion, then
press the ENTER button.
5
Select [YES] and press the ENTER
button to confirm (play back) the
part for deletion.
≥ A confirmation message appears when [NO] is selected.
Proceed to step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Select [YES] and press the ENTER button.
≥ To continue dividing and deleting other scenes, repeat steps 2-7.
To complete dividing
≥ Press the MENU button.
≥ It may not be possible to divide scenes with a short recording time.
≥ The actual division may slightly slip off the previously designated dividing point.
72
VQT3J95
, and set [VIDEO/PICTURE] of the play mode selection to
]
0h00m15s 0h00m15s 0h00m15s