Specifications - Panasonic AK-HC931 Operating Instructions Manual

Specifications

Power supply: DC 12 V (when external power
AC 150 V–240 V (when CCU
Power consumption: 33 W
43 W
1 indicates safety information.
Operating temperature
range: 32oF to 104oF (0oC to +40oC)
Storage temperature
range: –4oF to 140oF (–20oC to +60oC)
Operating ambient
humidity: Less than 85%
Weight: Approx. 10.7 lbs (4.85 kg)
Dimensions: 5 (W)k11-1/16 (H)k14-3/8 (D) inch
(excluding protrusions)
126 k 280 k 365 mm
Basic items
1) Pickup device: 2/3z million pixel ITCCD x 3
2) System: GBR pickup system
3) Color separation
optical system: f/1.4 prism
4) Optical filters: CC: 3200K, 4300K, 6300K, Cross
ND: CAP, Through, 1/4, 1/16, 1/64
5) Lens mount: Bayonet type
6) Output standard: SMPTE 296M
7) Sensitivity: f/10.0, 2000 lux, 3200 K, white
reflectance 89.9%
8) Horizontal modulation: More than 45% (27.5 MHz)
9) S/N ratio: 54 dB (Y: 30 MHz)
10) Horizontal frequency: 44.955 kHz, 750-line field
11) Vertical frequency: 59.94 Hz, progressive
Input/output signals
1) Mic input: –20, –30, –40, –50, –60 dBm
(XLR 3-pin femalek2)
Gain selected by switch
2) INCOM: 0 dBm/600 ohms
(XLR 5-pin, femalek2)
(Mixing is controlled separately for
PGM1 and PGM2.)
3) Monitor output: HD signals = 1Vp-p, 75 ohms (BNC)
Output signals can be selected
using the monitor output selector
switch.
4) QTV output: VBS signal = 1 Vp-p, 75 ohms
(BNC)
5) G/L input: 1 BNC connector (tri-level SYNC)
6) AUX output: VBS signal = 1 Vp-p, 75 ohms
(BNC)
(when optional unit has been
installed)
is supplied)
is connected)
(during external
power supply
operation)
(when CCU is
connected)
Diffusion
Control
1) Power selection: EXT, OFF, CCU
2) USER SEL: Functions specified by menu items
can be allocated to the switch.
3) RET A/B selection: For selecting the return signal
4) Front tally selection: Front tally HIGH, LOW, OFF (VF
unit)
5) Viewfinder marker
selection: Center marker, safety zone, 4:3
marker
6) Gain selection: LOW, MID, HIGH
7) Output selection: CAM, BAR, TEST
8) White balance mode: A, B, preset
9) Shutter speed
selection: 1/100, 1/125 1/250, 1/500, 1/1000,
1/2000
10) AWB, ABB settings
11) Menu selection
12) CALL SW
13) INCOM: MIC ON/OFF, receive or PGM level
14) MIC setting: MIC power, MIC gain, MIC1
selection
15) Optical filter setting: REM, LOCAL selection and LOCAL
setting
*When the CCU is connected, the selection functions for 6) to 10)
are not effective.
Optional connectors
1) VTR output (26-pin male connector made by
JAE)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
29