Panasonic AG-DVX100B Operating Instructions Manual page 63

27 Zoom position display
The zoom poison is displayed with Z00
(maximum wide-angle) - Z99 (maximum zoom).
28 Scene file name display
29 Displays marker
During shooting, pressing the ZEBRA button
once or twice will display the marker.
30 Counter display
The following data is selected in turn each time
the COUNTER button is pressed.
COUNTER:
Counter value
M COUNTER:
Counter value in memory stop mode
TC:
Time code value
When the time code value could not be read
correctly from the tape, [TC*] is displayed.
When it acts in drop frame mode, the colon
between seconds and frames become ".".
UB:
User information
When user information could not be read
correctly from the tape, [UB*] is displayed.
FR:
Frame rate information for recording
FR 60I : Standard (60i interlace) mode
(60 fields/sec.)
FR 30P : 30P progressive mode (30
frames/sec.)
FR 24P : 24P progressive mode (24
frames/sec.)
FR 24PA : 24P advanced mode
When in FR24P and FR 24PA mode, the
sequence information of the frame
conversion at the final place.
31 Operational state display
REC : Recording
: Recording (during self-portrait
*
shooting)
PAUSE : Recording pause
: Recording standby (during self-
*h
portrait recording)
: Play pause
STNDBY : Standby (the cylinder-head is
stopped)
A. DUB : Standby for dubbing record
A. DUB : Dubbing record
: Play
( ) : Fast-forward/Fast-forward play
(Rewind/Rewind play)
( ) : Slow play (Reverse slow play)
CHK : Rec check
( ) : Cue (reverse cue)
( ) : Frame-by-frame (Reverse
Frame-by-frame)
BLANK : Blank search
REC END : End of recording search
x /x (x /x
Variable-speed search (Reverse variable-
speed search)
32 ONE-SHOT recording display
Appears when "ON" has been selected for ONE-
SHOT REC in the RECORDING SETUP screen
of the setup menus.
33 AUTO button action display
When the AUTO button is pressed, this display
appears if the function configured in the AUTO
SW screen of the Setup menu is active.
):
63