Mode Dial - Shark HC450UK Series Owner's Manual

Power on/off
Heating
Controls
Timer
Brightness
Fan
Controls
AUTO Mode
REMOTE SHORTCUTS
Turn Off Sound: To turn off sounds, press and hold
the Brightness button for 3 seconds.
Turn On/Off Child Safety Lock: Press and hold the Timer
and Oscillation buttons to turn the Child Safety Lock on or
off. The Lock icon will appear on the front display when
the lock is activated.
Change Temperature Display from Celsius
to Fahrenheit: Press and hold Fan and Thermometer
buttons to change the temperature display from Celsius to
Fahrenheit.
Reset Filter Life: Press and hold the info button for
3 seconds to reset the Filter Life display after changing
the filter.
1. PURIFIED FAN
To operate FAN mode, turn the dial to the Fan icon. In this mode,
purified air will be directed out of the front vents.
2. PURIFIED HEAT
To operate HEAT mode, turn the dial to the Air icon. Then press
the Thermometer button on remote. In this mode, purified,
warm air will be directed out of the front vents.
3. PURIFIED AIR
To operate PURIFIED AIR mode, turn the mode dial to the Air icon.
In this mode, purified air will be diffused out the back vents. This
allows for continuous air purification without the breeze of a fan.
While the air will be purified in all modes,
boosts cleaning power.
PURIFIED AIR mode is compatible with AUTO and ECO modes.
You can use the removable remote control to customise the settings.
Air Info
Oscillation
MAX
Turn the dial to change modes.
PURIFIED AIR mode
REMOTE
MAX
On/Off: Press to turn the power on or off.
AUTO mode: Press to turn on AUTO mode. The fan speed
automatically adjusts, based on the air quality. As the air quality
improves, the fan speed will decrease. If air quality worsens, the
fan speed will increase. Leave your air purifier in AUTO mode for
optimal filter life and performance. AUTO mode is only available
in PURIFIED AIR mode.
Optimise Performance in ECO mode: After the air is 100% status for
10 minutes, the air purifier will enter ECO mode and
on the display. This reduces power draw and optimises the filter life.
Air Info: Press to switch between air quality display options.
See the Air Info Settings section for more information.
Fan Controls: Use the arrows to adjust the fan speed from 1-6.
Press the fan button to view the speed setting. Fan speed can be
adjusted in all 3 modes.
Note: When using AUTO mode, if fan speed is manually changed,
AUTO mode will be deactivated. For tips on optimal fan setting, see
Optimising Fan Speed section.
Heater Controls: Press the Thermometer button to turn
Target Temperature: Use the arrows to adjust the target
temperature. The heater will automatically work to reach and
maintain the target. The air purifier will beep when the target
temperature is reached.
MAX
HI HEAT Mode: To run the heater in HI HEAT mode without
selecting a target temperature, press and hold the right-side
temperature arrow until HI appears on the display. For more tips on
optimising heater performance, see the Heater Operation section.
Shut-Off Timer: Set the number of hours for the air purifier to
run before it automatically shuts off. Timer can be set from
1–12 hours.
Brightness: Press to dim the brightness of the display. Switch
between 3 options: full brightness, partially dim, or fully dim.
Oscillation: Press to turn the oscillation on or off. When oscillating,
the unit will rotate side to side to distribute airflow around the room.

MODE DIAL

Dial in FAN or HEAT Mode
Dial in PURIFIED AIR Mode
MAX
Remote Buttons
Air directed out of the FRONT
Air diffused out of the BACK
will appear
HEAT
on/off.