ENGLISH You have purchased a product made by JUNG PUMPEN and Warning of electrical voltage with it, therefore, also excellent quality and service. Secu- NOTICE! NOTICE! Danger to equipment and operation re this service by carrying out the installation works in ac- Qualification and training of personnel cordance with the instructions, so that our product can per- All personnel involved with the operation, servicing, inspection...
• Replace the small cover, making sure it clicks into place, and Protection category IP20 screw the alarm transmitter back together. Cable AG3, AG10: H07 RN-F The system can operate for approximately 3 hours using the Cable AGE, AGR : LIYY PVC battery.
ENGLISH INSTALLATION AG3, AG10 Fix the cable of the ball contact switch after approx. 35cm to the wall, to relief any strain, with the cable holder and hose clip, install the submersible ball contact switch at the desired height, by fixing it to the pressure pipe of the pump, for example.
Page 5
Name and address of the manufacturer: JUNG PUMPEN GmbH - Industriestr. 4-6 - 33803 Steinhagen - Germany - www.jung-pumpen.de We hereby declare, under our sole responsibility, that the product is in accordance with the specified Legislation. AG3 GB (JP50770) DKG GB (JP55612)