Advertisement
T
ROUBLESHOOTING
This troubleshooting guide discusses the
most common problems that prevent an IR
flasher from operating correctly.
Testing the Remote Control
Test that the hand-held remote control
operates the component when you point
it at the front panel (check the batteries if
it does not).
Main System Unit Power Supply
Check that the red power light on the
Main System Unit is lit (the wall adapter
should be plugged into an active AC
wall outlet and the wall adapter has to
be supplying 12V DC).
Adjusting the Flasher Level
Try adjusting the flasher level up or
down (some components sensors are
overloaded by too strong a command
from the IRC-1). If the operation of the
component improves when the flasher
level is all the way down, but it is still
not perfect, try moving the IRC-1 so that
11
Advertisement
