Set Up Your Handheld - 3Com MacPac 2 Getting Started Manual

Set up your handheld

For upgrading: If you are already using other software to synchronize your
handheld with your Macintosh — such as MacPac 1.0 or Now Synchronize — perform
®
a HotSync
skip to step 8.
1.
Remove the screen film.
2.
Install AAA batteries.
Push up on the stylus
to remove it.
3.
Calibrate the screen by tapping
the targets with the stylus.
4.
Set the time and date by tapping
the boxes and arrows with the stylus.
operation now to ensure the latest data is on your handheld. You can then