Getting To Know Your Air Fry Toaster Oven - PowerXL CRISP 'N BAKE TOD3415B-LA Use & Care Manual

Getting To Know Your Air Fry Toaster Oven

Product may vary slightly from what is illustrated.




1. Air Fry mesh basket
2. Rack
3. Bake pan/drip tray
4. Easy-view glass door
5. Function Buttons
6. Heating Element/Fan Icon
USING THE DIGITAL DISPLAY
Sleep Mode: When the oven is not in use, the function buttons and digital display are not
illuminated. If the oven is not in use and the controls are not touched for 5 minutes, it will go to
sleep.
Standby Mode: When you press any of the buttons or turn any of the dials, the function buttons
will illuminate. If you select a function, it will illuminate more than the other functions and the
digital display will flash. This indicates the oven is ready to be started. If the timer is at 0:00,
you'll need to put time on the oven before starting the oven.
Power On: When you have selected your desired function, temperature, and cook time, press
the start/stop button. The oven will power on and the digital display will stop flashing and start
counting down. After 30 seconds, the heating elements will glow. During operation, the heating
elements will cycle on and off to maintain the desired temperature.
Add Time: To add time while the unit is running, turn the Time/Temp knob to add more time.
Change Temperature: To change the temperature while the unit is running (in most functions),
press the Time/Temp knob to toggle to the
the temperature.
Pause: When the Start/Stop button is pressed before the timer reaches zero, the heating
elements turn off. The digital display flashes. The display shows the time left on the cooking
cycle. To restart the cooking cycle, press the Start/Stop button and the timer starts again.
-Horizontal lines represent the oven's upper and lower heating elements. When illuminated, the
oven uses those heating elements for cooking
-Fan icon represents the oven's convection fan which circulates hot air in the oven
for fast and even cooking on several functions. When illuminated, the oven uses the
convection fan for cooking. When the icon is flashing, the oven is cycling the fan on
and off for performance tailored for that cooking mode.
This appliance is intended for household use only.
Switching between Celsius and Fahrenheit: The user can switch the temperature display
from Celsius to Fahrenheit by holding down the pushbutton temperature/timer dial for more
than 5 seconds and rotating the dial left or right. The display should show "F" or "C" in the last
digit to demonstrate which is the setting until any of the controls are touched again.
28
7. Digital Display
8. Time/Temp Knob
• Rotate to change
• Press to toggle between time and temperature
9. Start/Stop button (turns unit ON or OFF)
10. Crumb Tray
setting then turn the time/temp knob to change
j




