Cleaning And Replacing The Filter(S); Replacing The Filter Instructions - ProBreeze PB-P06-US Quick Start Manual

CLEANING AND REPLACING THE FILTER(S)

WARNING: Always turn the appliance OFF and unplug the power cord from the electrical
outlet before handling and replacing the air filter.
• Preliminary Filter Cleaning Instructions
We recommend cleaning the Preliminary Filter every two months with warm water and
soap. Once washed this should be dried thoroughly before being placed back into the
appliance.
Step 1. Shut down the device and turn the power off (Figure 1).
Step 2. Open the door cover by lightly pulling the handle (Figure 2).
Step 3. Remove the preliminary filter by pulling on the clasps at the top of the filter.
Clean it with the warm water and soap.
Step 4. After cleaning, dry the filter thoroughly by exposing it to the sun or allowing it
todry naturally. Do not dry it with the drying machine.
Step 5. Place the clean and dry filter back into the appliance; ensuring the groove is on
the bottom of the unit.
Step 6. Re-attach the door cover.
• Carbon Clothes Mesh Filter Instructions
We recommended cleaning the filter with a vacuum cleaner once a month and replacing
it every 6 to 12 months, or after 3,000 hours of use. After 3,000 hours of use, the "ON/
OFF" button will blink and beep three times as a reminder to replace the filter. You may
need to replace the filter earlier depending on the environment of the room.
11 | English

REPLACING THE FILTER INSTRUCTIONS

WARNING: Always turn the appliance OFF and unplug the power cord from the electrical
outlet before handling and replacing the air filter.
Note: this filter is for Pro Breeze PB-P06 Smart Air Purifier use only.
To replace the filter:
Step 1. Shut down the appliance and turn the power off.
Step 2. Open the door cover by lightly pulling the handle (Figure 2).
Step 3. Remove the preliminary filter by pulling on the clasps at the top of the filter.
Clean it with the warm water and soap as per instructions above.
Step 4. Remove the composite filter by pulling out the two tabs at the top of the filter.
We recommend that you have a garbage bag ready to prevent the pollutants on
the filter falling back into the room (figure 3).
Step 5. Insert the new filter, ensuring the white grooves are on the outside and the white
"front" tabs are facing outwards.
Step 6. Place the preliminary filter back into the filter space with the groove at
the bottom
Step 7. Re-attach the door cover.
Step 8. Press and hold the "SPEED" AND "AUTO" buttons for 10 seconds to reset the
filter reminder.
Replacement filter model number: PB-P06F
English | 12