User Controls - Starkey Galaxy RIC Operation Manual

Operation (header)
Hearing Aid On & Off
On – The hearing aids will power on automatically after removing them from the charger ports. The hearing aid
will delay in powering on, allowing enough time to insert the hearing aid into the ear.
On – If the hearing aid is manually powered off, pressing the switch will power it on. The hearing aid will delay in
powering on, allowing enough time to insert the hearing aid into the ear.
OFF – The hearing aids will power off automatically when placed on the charger ports.
- The StarLink and StarLink Mini Charger will require an external power source (i.e. wall outlet) to
charge the hearing aids.
- StarLink Premium Mini Charger's onboard battery must be charged, otherwise charger must be
connected to an external power source (i.e. wall outlet).
OFF – The hearing aids can be powered off manually by pressing the switch for 3 seconds.
Auto On/Off
Your hearing aid may support the ability to automatically go into a low-powered state to conserve battery*. This control
can be configured by your hearing professional or via the My Starkey app. Place your hearing aid on a flat, stable surface
(i.e. a table) with your earmold or earbud facing upwards and it will go into a low-powered state after about 15 minutes.
To resume normal hearing aid function, pick up your hearing aid and place it in your ear. Your hearing aid will detect this
motion and switch back on again. You may hear a tone indicating that your hearing aid is powered on.
*Going into a low-powered state helps conserve battery consumption when used with rechargeable hearing

User Controls

Ask your hearing professional how your hearing aid's user control can be personally customized.
User Control Actions
- Short Press: Press and release the control
- Long Press: Press and hold the control for 3 seconds or greater
- Tap Gesture: Firmly tap twice on your hearing aid*
User Control Functions
- BiCROS Balance Control: Fine-tune the balance between your hearing aid and transmitter (CROS/BiCROS).
- Edge Mode
- Manual Alert: Initiate an alert text message by the My Starkey app on your smartphone.
- Program Control: Configure multiple memories within hearing aid.
- Multiflex Tinnitus Level: Adjust tinnitus stimulus played through hearing aid.
- Mute: Silence the hearing aid while wearing.
- Power On/Off:
- Program Change: Cycle through programs optimized for specific environments
- Start/Stop Accessory Streaming: Control streamed audio from a 2.4GHz accessory.
- Volume: Regulate the volume of environment sounds, or accessory stream if an accessory stream is present
+
: Identify and create a temporary, real-time adjustment tailored for challenging environments.