Clevertronics L10 Cleverfit Pro GEN II Theatre Installation & Maintenance Instructions

Clevertronics Clevertest and Clevertest Plus
Refer to the supplementary operation guide supplied with the Product.
Zoneworks Monitored Option
L10 Cleverfit Pro with part numbers LCFPRO-TH-ZW and LCFPRO-TH-DATA
communications modules (nodes).These fittings are monitored using Powerline Carrier Technology that
utilises the power cable to provide data communication to/from data routers installed on a dedicated data
trunk connected to a central Server. Zoneworks software on the server is used to monitor, coordinate
testing and collate test data from each L10 Cleverfit Pro. Zoneworks L10 Cleverfit Pro can be
commissioned by a single push of the test switch, or scanning of the supplied barcode. The LED Test
Switch indicator provides a multifunction indication of the status of the L10 Cleverfit Pro during testing and
normal operation:
State LED Operation
Commissioned LED on Solid (Green)
Un-commissioned LED flashes at 0.5Hz (0.5s Green, 0.5s Yellow)
Emergency Light Test in progress LED flashes at 3s On (Yellow) & 0.5s Off
For further information of installation of a Zoneworks XT system, please refer to the Zoneworks Users
Guide & Commissioning Guide.
DALI EM Option
L10 Cleverfit Pro with part numbers LCFPRO—TH-DALI
rd
facilitate connection and integration to 3 Party Lighting Control Systems. Before installing the LCFPRO-
TH-DALI please confirm that the Lighting Control System has the capability to monitor DALI Emergency
Luminaires. The LCFPRO-DALI will be addressed and configured into the control system by the Lighting
Control System Commissioning Technicians and not Clevertronics.
State LED Operation
Commissioned/ Un-commissioned LED on Solid (Green)
Emergency Light Test in progress LED flashes at 1s On (Yellow) & 1s Off
"IDENTIFY COMMAND"
Fitting goes into emergency mode for 10 seconds
A 2-way "figure 8" cable and terminal block facilitates the connection to the DALI network OR a 5/6way
"structured wiring system" lead and plug facilitating the power and DALI connection. DALI connections
are marked as Da Da.
are fitted with Zoneworks
are fitted with DALI modules (nodes) that
L10™ Cleverfit Pro GEN
LED Exit
Installation & Maintenance Instruction Leaflet
Designed in Australia to comply with the requirements of
AS2293.3: 2005 and AS/NZS CISPR15: 2011
NOTE: Standard product codes with this symbol
enabled with Clevertest Plus capability. Please refer to the
operation guide supplied with the product for details.
Models: LCFPRO-TH-xx-zz
Testing :
Manual Test xx = Blank
Zoneworks xx = ZW
Z/W DATA xx = DATA
DALI Comp. xx = DALI
Clevertest xx = CT
(NOTE: -CT Products supplied with the Clevertest Plus Symbol
Clevertest PLUS capability. Please refer to the operation guide supplied with the product for
details).
Spare Parts:
1530030 Battery, Lithium L10 Cell, 3.3V 2500mAh
8002920 PCA: LCF-Pro #CT10142 CTP
8002710 PCA: Duris LED Strip Clvrft Pro CT10276-D1
Important:
It is illegal for anyone, except for a licensed electrician to install or maintain this product. Before installation,
ensure that the electricity supply has been switched off and isolated. Installation must be carried out in
accordance with the relevant Australian and International Standards.
Installation:
II
Theatre
Victoria (Head Office & Manufacturing)
195 Chesterville Rd
Moorabbin VIC 3189
Phone: +61 3 9559 2700
Fax: +61 3 9559 2799
New South Wales
Phone: +61 2 8805 6400
Fax: +61 2 8805 6444
Queensland
Phone: +61 7 3442 9700
Fax: +61 7 3442 9777
South Australia/Northern Territory
Phone: +61 8 8301 8800
Fax: +61 8 8351 8286
are
Western Australia
Phone: +61 8 9248 3720
Fax: +61 8 9248 3725
New Zealand
Phone: +64 800 548 448
Options:
Running Man zz=R
Running Man Left Arrow zz=RL
Running Man Right Arrow zz=RR
Double sided R/M zz=DS-R
Double sided R/M Arrow zz=DS-RAOW
are activated with
1944008 V1.0 22 November 2017