Pre-Install Instruction - Philips EasyKey 9000 Series User Manual

Pre-install Instruction

Step 1 | Check the door opening direction
This product can be installed on 4 types of opening directions: left-out pull,
right-in push, right-out pull and left-in push
Left-open
Step 2 | Latch bolt direction change
Loosen the screws by turning
1
them clockwise with Allen
wrench and remove the mortise
plate.
Mount the mortise plate and
3
fasten it with screws.
Attention
1. Please choose proper installation kit as per the door thickness.
2. The default installation kit is applicable for a door thickness of 38-60mm, if your door thickness
does not within this range, please feel free to contact us.
Indoor
Left-in
push
Outdoor
Indoor
Left-
out pull
Outdoor
guide plate
Allen wrench
guide plate
Allen wrench
Right-open
Take out the latch bolt and
2
rotate it to 180°, then put it
back.
Oblique
tongue
Indoor
Right-
in push
Outdoor
Indoor
Right-
out pull
Outdoor
5