Soonfire MX75 Manual

High performance-price ratio
Excellent customer support
10 Years Engaged in Flashlight Industry
More efficient and Agile Supply Chain
Website:http://www.soonfire.com
Email:sale@soonfire.com
SOONFIRE Official website
Using:
1.Half press the tail switch to enter the tactical
lighting mode(Beacon Mode), release the tail
switch to exit.
2.Fully press the tail switch to enter the
illumination mode, click the side switch to
adjust the brightness.
3. Press the side switch for 2 seconds to enter
the Strobe /SOS light modes, Press the side
switch 2 seconds to go back.
4. Quickly double-click the side switch to
directly change to the ultra-bright mode.
5. Turn off the flashlight and memorize
last used mode.
Charging
Red - while charging
Blue - fully charged
Flashing red light - Errors
NOTE:Tighten the End Cap and the Body
properly.
It will turn off automatically when charging.
Press the switch for 2 seconds to turn on
low modes.
Charge at least once every 6 months.
Activate warranty
Plug USB-C Cable
√
√
×
NOTE: Screw down the End Cap and the Body
before charging / use
Working Voltage: 2.7-8.4V
Powered by one 21700 battery (included)
one 18650 battery
/ two CR123A (Use attached battery cover)
Tail switch - ON / OFF
Power Indicator
Blue - Saturated
Red constant - Poor
Red flashing - Needs Charging
Smart adjustment brightness
2
ITS Smart Temperature Control System
1. Brightness automatically decreases with time.
2.High brightness mode has a limit of 3 minutes.
3.The usage time varies depending on the battery
capacity.
4
Side switch - change mode
1
3
5