How Do I Pair My Device?; What Touch Control Commands Are There? - DeFunc TRUE LITE Quick Start Manual

How do I pair my device?

1. Take the earbuds out of the charging case or press the
touch control area (below the "+" area) on both earbuds for
about 3 seconds until you hear the starting sound. Either
course of action turns the earbuds on.
2. Go to the Bluetooth settings on your device and make
sure Bluetooth is turned on.
3. In the list of available devices, choose Defunc TRUE LITE
and accept to pair.

What touch control commands are there?

Power on: Open the cap of the charging case and take out
the earbuds for auto-power on. If the earbuds are turned off
and not in the charging case, press the touch control on both
left and right earbuds for 3 seconds to power on.
Power off: Put the earbuds back in the charging case and
close the lid or touch either the right or left earbuds for 5
seconds. Auto-power off will be activated after 5 minutes in
paired mode without connected device.
Play/pause: While listening to music, double-click the touch