Cleaning - Quark buubibottle User Manual

Cleaning Instructions
Disconnect the power supply and ensure the bottle is cool before proceeding.
Do not immerse the bottle in water or use corrosive cleaning agents.
Do not clean the bottle with abbraisive cleaning tools.
Keep out of reach of children and pets during sterilization.
It is recommended that you clean the bottle according to these instructions brfore first use
and after each subsequent use.
Add a drop of dish soap and 150ml/5oz warm water to the liquid reservoir.
●
Place the included Flex Brush into the reservoir and secure the lid.
●
Shake well for one minute.
●
Empty the reservoir and remove the Flex Brush. Rinse well.
●
To sterilize the bottle, boil water in a kettle. Allow the boil to stop rolling and carefully
●
fill the liquid reservoir. Do not attach the lid. Discard once the water has cooled.
To clean the outside of the bottle, ensure the charging port cover is securely seated
●
and wipe with a damp cloth.
To clean the lid and carry strap, hand wash with warm soapy water or place in the
●
top rack of dishwasher.
Minerals in tap water or non-distilled water may cause scaling which can affect performance.
Descale the bottle regularly by filling the liquid reservoir with a 1:1 solution of water and white
vinegar. Let sit for 30 minutes. Dispose of the solution, rinse well, and wash the bottle as
normal to remove any residual odour. Never use a chemical descaling agent.
Note: If used to warm coffee, the heating element silicone housing can become stained.