Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pani BP 4 CT
Summary of Contents for Pani BP 4 CT
-
Page 2: Table Of Contents
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH Status of February 2010 CONTENTS Page Dimension Drawing 1.1) Projector................3 1.1.1) Yoke Assembly "Standing"..........3 1.1.2) Yoke Assembly "Hanging" ..........3 1.2) Ballast ................4 Position Drawing 2.1) Projector Legend for 2.1) .............5 2.2) - Page 3 Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH Page Electrical Connection............14 7.1) Main Power Connection 7.2) Connecting Cable Ballast - Projector 7.3) Remote Ignition - DMX 512 Objective Lenses ...............15 8.1) Front Condenser Lens 8.2) Projection Objective Lenses 8.3)
-
Page 4: Projector
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 1) Dimension Drawing 1.1) Projector 1.1.1) Yoke Assembly "Standing" 1.1.2) Yoke Assembly "Hanging"... -
Page 5: Ballast
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 1.2) Ballast BP 4 Compact... -
Page 6: Projector
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 2) Position Drawing 2.1) Projector Legend Adjustable Clamp Lever for Quick Adjust (On Both Sides) Hand Wheel for Fine Adjustment Lamp Adjustment Fastener for Housing Cover Housing Cover Objective Support Bolts... -
Page 7: Control Panel On The Projector
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 2.2) Control Panel on the Projector Legend Power Indicator ON- Push-button OFF- Push-button Elapsed Hour Counter Remote Connection Power Connection Outlets for auxilliary circuits (230 VAC) Amphenol 4-pole Remote Ignition DMX 512... -
Page 8: Ballast
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 2.3) Ballast BP 4 Compact Control Panel on the Ballast Power indicator lamp Illuminated when power is connected to the ballast ON- Push-button (green) When the "ON" - Push-button is momentarily pressed, the... - Page 9 Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH Ground Test Indicator When depressed the indicator glows yellow indicating correct polarity and grounding. Remote Cable to the Projector Remote Fuse F 2, 2 AT (melting fuse) Ground Control Lamp...
-
Page 10: Projectors Of The "Compact"-Series
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 3) Mounting Accessories For standing and hanging projector installations, the following options are available. 3.1) Undercarriage for Projectors of the "Compact"-Series Horizontal fine adjustment (+/-6°) and telescoping rails provide... -
Page 11: Projector Cart For Projectors Of The "Compact"-Series
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 3.3) Projector Cart for Projectors of the "Compact"-Series Rolling cart, with horizontal (±6°) associated vertical (+18° -20°) adjustment projectors accessories (i.e. ZOOM- Objective). Order Code: 12037 3.4) Hanging Apparatus for Projectors of the "Compact"-Series... -
Page 12: Construction
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 4) Construction 4.1) Mechanical Construction of the Projector The light sheet metal housing with double wall heat isolation system is mounted in a stable support yoke (8). Fine adjustment (2) is accomplished by means of adjustable telescoping rails on either side (7). -
Page 13: Hmi- Lamp
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 5) Operation 5.1 ) HMI- Lamp 5.1.1) Installation and Replacement of the HMI- Lamp For operation of the Projector a single ended HMI- Lamp 4000 W is required. Order... -
Page 14: Using The Tilt Angle Meter
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 5.4) Using the Tilt Angle Meter For safe operation it is necessary to respect the tilt range of the projector (see General Technical Data on page 21). Use the delivered Tilt Angle Meter by applying it on the top edge of the projector (before operation). -
Page 15: Electrical Connection
7) Electrical Connection (See Electrical Schematic 230- 02- 01/a) The HMI Stage Projector BP 4 CT is used in conjunction with the ballast 4000 W, 220/240V- 50 Hz, 208/220V- 60 Hz (Order Code: 19203). The ballast incorporates a choke which limits lamp power to 24 A. -
Page 16: Objective Lenses
Pani Projection and Lighting Vertriebs GmbH 8) Objective Lenses 8.1) Front Condenser Lens In the BP 4 CT, there are 4 different front condenser lenses to choose from, depending on the focal length objective lens required. These are as follows: PC Diameter 230 mm, multicoated for Objective Lens f= 11;... -
Page 17: Projection Diagram
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 9) Projection Diagram for O= 17cm METER width of projection calculating formulas F ... focal length of projection lens B ... width of the image D ... projection distance (measured from the middle of the objective lens) O ... -
Page 18: Slide (Transparency) Material
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 10) Slide (Transparency) Material Because of the ever changing available film materials, we do not wish to suggest any specific type. Our best recommendation however comes from our own experience with film type Agfaclear (from Agfa), type Duraclear (from Kodak) and type Ilfochrome (from Ilford). -
Page 19: Electrical Schematic
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 11) Electrical Schematic BP 4 CT Drawing No.: 230- 02- 01... -
Page 20: Basic Unit As Delivered
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 12) Basic Unit as Delivered HMI- STAGE PROJECTOR 4 KW - CT The Projector is supplied with a universal mounting yoke for hanging and standingconfigurations and mounted on a rolling undercarriage. - Page 21 Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH Description Type: Order Code: Quick frames 18x18cm for film slides 12812 Tool kit for Quick frames 12811 Tempered glass plate 18x 18 cm G 502 12803 Test slide with raster on Tempered glass 18x 18 cm...
-
Page 22: General Technical Data
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 14) General Technical Data Projector: Tilt Angle Range of Projector: floor mounted: 22° up, 45° down hanging: 28° up , 39° down Protection Class: IP 20 Max. Operating Temp: max. 35°C... -
Page 23: Spare Parts
Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH 15) Spare Parts BP 4 CT Main Assy. No.: 230- Description Order Code: Qty./Unit Housing Main Assy. No.: 230- 01- Mounting plate 11-0227 Mounting plate for tangential blower 11-0228... - Page 24 Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH Description Order Code: Qty. /Unit Optical Materials Haupt Nr.: 230- 04- Plano-Convex Lens for Objective11 - 27 cm Ø 230/ 300 MC Plano-Convex Lens for Objective33 - 40 cm Ø...
- Page 25 Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH Description Order Code: Qty. /Unit Rolling Undercarriage 12001 Plate for Support Bracket 31-0071 Lift-off Spindle Complete 11-0203 Casters 21-0060 Fixed Rollers 21-0061 PVC Sleeve - Black 21-0111 PVC Sleeve - Black...
- Page 26 Stage Projector BP 4 CT Pani Projection and Lighting Vertriebs GmbH Ballast BC 4000- EP (standard) For spareparts of the ballast versions -A and -J please contact the PANI-support team! Pos. Description Order Code: Qty. /Unit Wheels 88941295 Choke 63090141...