superbrightleds PLMB-xK3BR User Manual

Important: Read all instructions prior to installation.
Bollard Style LED Landscape Lights
Troubleshooting
Problem Possible Cause
Fixture does not light 1. There is no power to 12 V power
supply.
2. Wire connection loose.
3. Primary landscape wire is not
connected to 12 V power supply or
wire has a disconnection.
4. Minimum load requirement not
met.
Light flickers 1. There is a loose connection to
(one fixture) primary landscape wire.
Light flickers 1. There is a loose connection to
(multiple fixtures) 12 V power supply.
2. Minimum load requirement not
met.
Light is dim 1. Maximum load of 12 V power
supply has been exceeded.
2. Recommended run length of
the landscape wire has been
exceeded.
* For superbrightleds.com technical help call 866-590-3533 or use our online chat service.
Rev Date: V0.1 11/21/2018
User Manual
PLMB-xK3BR
Probable Solution
1. Check the outlet to 12 V power supply and ensure that a breaker
or GFCI circuit has not been tripped.
2. Check wiring to ensure it is securely connected.
3. Check primary landscape wire connection to 12 V power supply.
Next, follow wires from fixture to 12 V power supply to ensure
continuous run and/or follow wires between problematic fixture
and nearest working fixture.
4. Consult power supply specifications/manual and make certain
minimum load requirement is met.
1. Check wire connections.
1. Disconnect power to power supply. Check primary landscape
wire for loose connections or possible short.
2. Consult power supply specifications/manual and make certain
minimum load requirement is met.
1. Check for other lights or load on same system and/or increase
12 V power supply wattage.
2. Increase primary landscape wire gauge size.
Bollard Style LED Landscape Lights
PLMB-xK3BR
User Manual
IP 65
WEATHERPROOF
Rev Date: V0.1 11/21/2018