Listen To Music From Bluetooth Device; Fm Operation; Auto Scan And Save Preset Stations; Tuning In A Station - Horizon Fitness ACUSTIC O HAV-M5310 Operating Instructions Manual

NOTE:
• The NFC function only works with mobile devices that support NFC technology.
• You may need to remove your mobile device case to connect using NFC.

Listen to Music from Bluetooth Device

 If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the
music stored on the device through the player.
 If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's remote
control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
- To skip to a track, press the

Auto Scan and Save Preset Stations

1. Press the FUNCTION button on the main unit or the FUNC button on the remote control to select the TUNER
source.
2. Press and hold the PROG/CLOCK button for a few seconds to activate automatic programming. All available
stations are programmed in the order of waveband reception strength.
- The first programmed radio station is played automatically.
Tune to a preset radio station
- Press the

Tuning in a Station

1. Press and hold the
a station. The tuner will stop searching after tuning into a radio station.
Note: The search may not stop at a station with a very weak signal.
2. Press and hold the BASS/TUNING button, then press the
until the desired frequency reception quality is found and press the
Tip: Each press the
radio to another location.

Presetting Stations Manually

You can store up to 20 of your favourite stations to the memory. This will enable you to access your favourite
stations quickly and easily.
1. To store a preset station, you must first be listening to the station that you would like to save, press and hold
the /PAIR/MUTE button on the remote control. The preset number will show on the display.
2. Press the buttons on the remote control to select your desired preset station number and then press
the /PAIR/MUTE button on the remote control to confirm.
3. The station will be stored.
/PAIR/MUTE button on the remote control.
buttons on the remote control.

FM Operation

buttons to skip to previous/next preset radio station.
buttons on the remote control for a few seconds, the tuner will start searching for
will adjust the frequency by 0.1MHz. If reception is still poor, try to move the
buttons repeatedly on the remote control
/PAIR/MUTE to confirm.
20