Table of Contents
Advertisement
16
EN
N ex t Function M em ory
You can set your recorder's power to go off automatically after
the tape is fully rewound. Before starting, make sure the
recorder is in the Stop mode.
For Automatic Power Off After Tape Rewind . . .
. . . press REW , then press
Ta pe Position Indica tor
The tape position indicator
appears on screen when, from
the Stop mode, you press FF ,
REW or perform an Index
Search. The position of " 5 " in
relation to "0" (beginning) or "+"
(end) shows you where you are
on the tape.
"O.S.D." (
pg. 10) must be
set to "ON", or the indicator
will not appear.
N O TE:
Depending on the type of tape used, there may be times when
the indication is not correct.
Sk ip Sea rch
SKIP O VER UN WAN TED
SECTIO N S
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
N O TE:
To return to normal playback during a Skip Search, press PLAY .
Soundtra ck Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
D uring Playback
Pressing AU D IO on the remote control changes the soundtrack being played back as follows:
Recorder's Front Panel
NORM
NORM
Downloaded from:
https://www.usersmanualguide.com/
within 2 seconds.
3
+
0
Beginning
TRACK
On-Screen Display
HI FI
L
R
HI FI
L
HI FI
R
NORM
HI FI
NORM
Insta nt ReV iew
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
N O TE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE IN ST AN T
REVIEW
1
Press REVIEW . The recorder power comes on and the
+
+
recorder searches for the index code indicating the start
1:23:45
of the last timer-recorded programme. Once it's found,
playback begins automatically.
● The front display panel tells you how many
End
programmes have been recorded. If you have, for
example, 3 programmes, "REVIEW" and "3" appear
and blink. To watch the first of the 3 programmes,
press REVIEW three times. The recorder searches and
begins playback automatically. You can access a
programme as far as 9 index codes away from the
current tape position.
N O TE:
Instant ReView is not possible while the recorder is in the Timer
mode.
U SE
For Hi-Fi stereo tapes
For main audio of Bilingual tapes
For sub audio of Bilingual tapes
For audio-dubbed tapes
For audio-dubbed tapes
PLAYBACK (cont.)
N O TES:
● "
" should normally be
selected. In this mode, Hi-Fi stereo
tapes are played back in stereo, and
the NORM track is played back
automatically for tapes with only
normal audio.
● For instructions on recording stereo
and bilingual programmes, refer to
page 19.
● "O.S.D." must be set to "ON" or the
on-screen displays will not appear
(
pg. 10).
Advertisement
Table of Contents
