JVC HR-S7600AM Instructions Manual page 19

Tim eSca n
N ames of
Special-effects
playback
SPEED SP
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
SPEED LP
Audio output
N ames of
Special-effects
playback
SPEED SP/ EP
Audio output
* Still mode cannot be engaged using the remote control's PU SH JO G
pressing the PAU SE button.
** Smooth slow motion delivering an uninterrupted moving image without distortion. Time J og does not work NTSC or
MECECAM playback.
● If the picture jitters vertically, noise appears or the upper or
lower part of the picture is distorded at -1/2x, -1/3x, 1/3x, 1/2x
or 1.5x normal speed, use TV PRO G + or – to correct the
picture.
● Noise tends to apperar at -9x or 9x normal speed during
TimeScan search.
● When noise appears or the upper or lower part of the
picture is distorted during TimeScan search, press
adjust tracking with TV PRO G + or – button.
● The speed is shown during TimeScan in the upper right
corner of the TV screen for approx. 5 seconds. (The display
may be distorted.)
● To resume normal playback, press
● When using the recorder's
playback speed may not change in the correct step if it is
turned too fast.
● Picture and audio may become distorted when the
recording speed changes. When this happens, resume
normal playback once, and then try using TimeScan again.
● The picture may be noisy or there may be a loss of colour
when you change the playback speed. (More noise will
appear with LP recordings.)
● During high-speed search with an NTSC tape containing
both SP and EP recordings, the search speed will change
automatically to 7x normal playback speed with TimeScan
when the recording tape speed switches from EP to SP .
If you don't want to hear TimeScan audio, set "TIM E SCAN AU D IO " to "O FF" (See below).
TimeSca n Audio
The audio output can be set ON/OFF during TimeScan. Select ON/OFF
as required.
* The default setting is "ON".
1
Press M EN U to access the Main Menu screen.
2
Press PU SH JO G %fi to place the pointer next to "FUNCTION
SET", then press O K or PU SH JO G
3
Press PU SH JO G %fi to place the pointer next to "TIME SCAN
AUDIO", then press O K or PU SH JO G
4
Press M EN U to return to the normal screen.
Downloaded from: https://www.usersmanualguide.com/
< PAL or MESECAM tape >
Reverse
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Search Play
-9x -7x -5x -3x -1x
-7x -3x
Audio is output.
< NTSC tape >
Reverse
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Search Play
-7x -5x -3x -1x
Audio is output.
PLAY .
TIM E SCAN SH U TTLE ring, the
.
to select "ON" or "OFF".
Slow-motion Slow-motion
*Still
(Time J og**) (Time J og**)
-1/2x -1/3x 0 1/3x
-1/2x 0
Audio is not Audio is
output. output.
Slow-motion *Still Slow-motion
-1/6x -1/18x 0 1/18x
Audio is not Audio is Audio is not
output. output.
or button. Still mode can only be engaged by
● Noise may appear or the upper part of the picture may be
distorted during search (including TimeScan), still, frame-by-
frame playback, 2x search, or depending on the tape being used.
● Picture may appear distorted in comparison to normal playback.
● When normal playback resumes from search (including
TimeScan), still, slow motion or frame-by-frame playback,
the picture may jitter vertically momentarily depending on
the type of TV being used.
and
● In TimeScan mode there will be a time lag between the video
and the audio and noise may appear in the audio signal.
● TimeScan sound quality will differ in comparison to normal
playback.
● When material such as music videos where there is non-
stop sound (very few breaks in the soundtrack) are viewed
at 1.5x or 2x normal speed, the audio playback may be
faster than normal.
● Depending on the type of tape contents, the sound may not
be clear during forward slow-motion playback.
● Time J og cannot be activated by pressing
than 2 seconds.
● When the playback direction is reversed, it takes
approximately 6 seconds until sound is heard.
● There will be a loss of colour or the picture will be monochrome
with an LP-recorded MESECAM tape during TimeScan.
● TimeScan at -1/2x, 1/2x and 1.5x normal speed are not
possible with a MESECAM tape.
FUNCTION SET
B. E. S. T.
PICTURE CONTROL
AUTO TIMER
O. S. D.
AUTO SP=LP TIMER
NEXT PAGE
[5/∞] =
[MENU] : EXIT
Forward
Play Search
1/2x 1x 1.5x 2x 3x 5x 7x 9x
1/2x 1x 1.5x 2x
Audio is
Audio is output.
output.
Forward
Play Search
1/6x 1x 2x 3x 5x 7x
Audio is output.
output.
PAU SE for longer
PREVIOUS PAGE
ON DIGITAL 3R
AUTO S-VHS
OFF TIME SCAN AUDIO
ON
OFF
[5/∞] =
[MENU] : EXIT
19
EN
5x 9x
ON
ON
ON