JVC HR-S7600EK Instructions Manual page 26

26
Look ing For
The Scene
You W a nt
1
2
1
2
Sk ip Sea rch
SKIP O VER UN WAN TED
SECTIO N S
1
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
N O TE:
To return to normal playback during a Skip Search, press PLAY .
Downloaded from: https://www.usersmanualguide.com/
– –:– –
REVIEW
1 2 3
30 SEC
4 5 6
7 8 9
3
4
0
4
3
AD VAN CED O PERATIO N S (cont.)
Index Sea rch
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
N O TES:
● Before starting, make sure the
recorder is in the Stop mode.
● If "O.S.D." is set to "ON" (
screen while an index code is being marked.
ACTIVATE IN DEX SEARCH
1
Press or ( ™ or £ ). " ™ 1" or " £ 1" is
@ #
displayed on screen and search begins in the corre-
sponding direction.
● To access index codes 2 through 9, press
repeatedly until the correct index number is dis-
played.
Ex.: To locate the beginning of B from the current
position, press
To locate the beginning of D from the current
position, press
A
–2
● When the specified index code is located, playback
begins automatically.
Insta nt ReV iew
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
N O TE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE IN ST AN T
REVIEW
1
Press REVIEW . The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
● The front display panel tells you how many
programmes have been timer-recorded. If you have,
for example, 3 programmes, " REVIEW" and "3"
appear and blink. To watch the first of the 3
programmes, press REVIEW three times. The recorder
searches and begins playback automatically. You can
access a programme as far as 9 index codes away
from the current tape position.
N O TES:
● Instant ReView is not possible while the recorder is in the
Timer mode.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Prog recording
( pg. 28).
£ 2
pg. 39), "MARK" blinks on the
@ or
twice.
@
once.
#
Current position
B C D E F
–1 1 2 3
Index number
#