Table of Contents
Advertisement
28
Edit From
A Ca mcorder
N U M BER "0"
N O TES:
● All necessary cables can be obtained from your dealer.
● You can also use another video recorder as the player instead
of a camcorder.
● When you select EDIT to dub tapes in step
AUTO (or NORM when B.E.S.T. is set to OFF) after you finish
dubbing the tapes.
A If the camcorder has no S-VID EO output connector...
Recorder
Camcorder
Player
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
2
4
5
6
7
8
9
0
4
TV PRO G
1
?
3 , be sure to select
Audio/Video Cable
VIDEO OUT
(not provided)
AUDIO OUT
AD VAN CED O PERATIO N S (cont.)
You can use a camcorder as the source player and your video
recorder as the recorder.
MAKE CO N N ECTIO N S
1
If the camcorder has no S-VIDEO output connector...
A
... connect the camcorder's AUDIO/VIDEO OUT
connectors to the recorder's AV2 IN/DECODER or
AV1 IN/OUT connector via the cable adapter.
B
If the camcorder has an S-VIDEO output connector...
... connect the camcorder's S-VIDEO OUT and
AUDIO OUT connectors to the recorder's S-VIDEO
and AUDIO input connectors.
● When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO L input
connector on your recorder.
● When a Master Edit Control-equipped J VC camcorder
is used, the camcorder is capable of controlling the
recorder. Refer to the camcorder's instruction manual
for operating procedure.
SET RECO RDER'S IN PUT MO DE
2
Press N U M BER key " 0" and/or TV PRO G to select "L-1"
for the AV1 IN/OUT connector, "L-2" for the AV2 IN/
DECODER connector, or "S-1" for the AUDIO/S-VIDEO
input connectors, depending on the connectors being
used.
SET EDIT MO DE
3
See "Picture Control" on page 27.
ST ART CAMCO RDER
4
Engage its Play mode.
ST ART RECO RDER
5
Engage its Record mode.
B If the camcorder has an S-VID EO output connector...
Recorder
S-VIDEO input
AUDIO input
S-Video Cable
(not provided)
S-VIDEO OUT
Camcorder
AUDIO OUT
Player
Audio Cable
(not provided)
Advertisement
Table of Contents
