JVC HR-S6600EK Instructions Manual page 15

Hide thumbs Also See for HR-S6600EK:
Table of Contents

Advertisement

0000
Ta pe Rem a ining Time
DISPLAY REMAIN IN G TIME
1
Press D ISPLAY (or – –:– – ) until the time remaining on
the tape appears.
● The display panel shows the tape remaining time
with "
" displayed.
● By pressing the
change the display to show the counter reading,
preset position*, clock time or tape remaining time.
* Preset position is not displayed during playback.
N O TE:
Depending on the type of tape used, there may be times when
the tape remaining time reading may not appear right away, or
is not correct. "– –:– –" may sometimes appear, or the display
may blink on occasion.
Downloaded from:
https://www.usersmanualguide.com/
C. RESET
– –:– –
1
2
3
2
4
5
6
8
9
7
0
4
1
?
D ISPLAY (or – –:– – ) button, you can
Record O ne Progra mme
W hile W a tching Another
SELECT PRESET TO WATCH
1
Once recording is in progress, all you need to do is to
set the preset controls on the TV for the station you
wish to view.
● The programme selected with the TV's preset controls
appears on the TV screen while the one selected with
the recorder's TV PRO G buttons is recorded on the
tape.
Ela psed Recording Time
Indica tion
You can check the exact time of a recording.
SET CO UN TER DISPLAY
1
Press D ISPLAY (or – –:– – ) until a counter reading
appears on the dispay panel.
RESET CO UN TER
2
Press C. RESET (or 0000 ) before starting recording or
playback.
● The counter is reset to " 0:00:00" and shows the exact
elapsed time as the tape runs.
Instant Timer Recording (ITR)
This easy method allows you to record for any length of time
from 30 mins. to 6 hours (selectable in 30-min. increments),
and shuts off the recorder after recording is finished.
ST ART RECO RDIN G
1
Press RECO RD on the recorder.
EN GAGE ITR MO DE
2
Press RECO RD again. "
the front display panel.
SET RECO RDIN G
DURATIO N
3
If you want to record for more than 30 minutes, press
RECO RD to extend the time. Each press extends
recording time by 30 minutes.
N O TE:
You can only perform ITR using the RECO RD button on the
recorder's front panel.
15
" blinks and 0:30 appears on

Advertisement

Table of Contents
loading

Table of Contents