Setup Procedure; Input Password; Menu Tree Quick Guide - BLUE JAY BJ-MCM1100 User Manual

7. - SETUP PROCEDURE

This chart just suits MCM1310 and MCM1110, or client optional display unit, other models please
skip this chart to RS485 communication guide, use any series scan programming also can do same
setting!!
Once into the SETUP, use the keyboard to select different options and enter required variables:

7.1.- Input Password

A 4-figure password is required to be entered (in case that in case that the meter will work
without permission.)
At normal display mode, press
Meter display "
Ask for the password. Press
to move the cursor. After password switch press
If password is correct, meter can enter next setting.
Notes: the default password is 0001.

7.2.- Menu tree quick guide

In the Setup menu, include following 4 parts:
SYS
-IN-
BUS
DO
Sub-menu please refer to following drawing:
Tel: +0086-023-67628702
www.cqbluejay.com
Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China
to enter the programming mode, meter display
",
to input the password number, from "0~9". Press
to confirm the input.
User Manual
Email:tech@cqbluejay.com
- 16 -