Operation Mode - BLUE JAY BJ-MCM1100 User Manual

6. - OPERATION MODE

When the MCM1000 and display unit are powered up, the entire symbol will be on, and the meter
starts to self- test. After some seconds, the meter is ready for operation and shows one of the
available screens.
Parameters on display can be switched by pressing key
at any moment
When the key
Pressing again the key
In setting menu, pressing key
This key named "SET" key, pressing it can open the programming menu and return to previous
menu.
This key named "Enter" key, pressing this key you can exit it with saving any modification that you
might have done, in menu operation press "Enter" key, and user can go to the next menu.
Note:
Press key or
screen:
In the menu set mode, when changes the parameter and exit setting, the meter will ask to "SAVE",
press exit without saving
press save and exit.
Tel: +0086-023-67628702
www.cqbluejay.com
Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China
is pressed, the screen CURRENT values of each phase are now showing.
, the screen will show the following parameters successively.
can move the setting cursor to left;
Pressing can enter the number 0 ~ 9.
in normal standby status, and the meter will show different data in main
User Manual
or . LCD shown on screen
Email:tech@cqbluejay.com
- 13 -