Atag VA2214MP User Manual page 144

Settings
TAB
Error readout
Restore factory defaults
Exit
Alternatives
5:00 (Off) Activate this setting when using an all-in-one detergent that
5:01 (On) contains rinse aid.
This setting reduces the rinse aid dosage and affects how
often the dishwasher's built-in softener is regenerated.
Pre-selected at factory: 00
F-- Any error messages.
When contacting the service department, you may be asked
to provide the most recent error messages.
rSt Restores all settings to the factory defaults.
Select rSt and confirm by pressing
End To exit the dishwasher's settings menu, select End and
press
(The menu closes automatically after three seconds.)
.
Settings
.
21