Advertisement
Quick Links
Spreader
information
SPREADER SETTING GUIDELINES
Settings for SINGLE PASS application at full rate
Product Name
Sierraform GT
Sportsmaster
Sportsmaster Organic
Greenmaster Organic
Greenmaster Pro-Lite
H
Pro granules
2
STEP
Coated products aren't suitable for drop spreaders.
Scotts International B.V.,
Scotts Professional
P.O. Box 40, 4190 CA Geldermalsen,
The Netherlands
Tel.: +31 (0)418 655 700
Fax: +31 (0)418 655 795
E-mail: info@scottsprofessional.com
Internet: www.scottsprofessional.com
SS-2
Professional Drop Spreader
BENEFITS
1. Hopper capacity: 46 litres
2. Spreader width: 91 cm
3. Exact setting of fertilizer application rates
4. Can also be used for grass seed and sand
5. Easy to handle because of large wheels with broad pneumatic tyres
6. Stainless steel frame, hopper and fasteners provide outstanding durability and
corrosion resistance
7. Extended handle with grips for added comfort
8. Lift handles in the front and bank for easier loading and unloading
Effective
Spreader setting at full label rates. Amount of product (g/m
width (m)
5
10
0,91
3,25
0,91
3,75
0,91
4,00
0,91
4,25
0,91
3,75
0,91
2,00
2,75
091
3,75
15
20
25
30
3,75
4,25
4,75
5,25
4,25
4,75
5,25
6,00
5,00
6,00
7,00
8,00
4,75
5,00
5,50
6,00
4,00
4,50
5,00
5,25
3,25
4,25
4,75
The spreader settings are guidelines only. The spreader should be calibrated
prior to application to ensure accuracy. The spreader settings are based on a
walking speed of 5 km/hour. Walking faster or slower than 5 km/hour
will alter the spread width and application rate. Exact rates are dependent
upon the spreader itself and the accuracy of the person operating it.
) applied after one run:
2
35
40
45
50
5,75
6,25
6,50
6,75
6,25
6,75
7,00
7,25
9,00
10,00
11,00
12,00
6,25
6,50
6,75
7,25
5,50
6,00
6,25
6,50
55
7,75
Advertisement
Summary of Contents for Scotts SS-2
- Page 1 5 km/hour. Walking faster or slower than 5 km/hour will alter the spread width and application rate. Exact rates are dependent upon the spreader itself and the accuracy of the person operating it. Scotts International B.V., Scotts Professional P.O. Box 40, 4190 CA Geldermalsen, The Netherlands Tel.: +31 (0)418 655 700...
- Page 2 4. Stand spreader upright on wheels. Attach upper handle ASSEMBLY assembly to handle brace (make sure handle is positioned as 1. Remove spreader and components from carton. shown) using four 1/4-20 X 1 1/2” hex bolts, eight curved Place hopper on its front panel, insert two 1/4-20 X washers, and four locknuts.
- Page 3 MAINTENANCE 1. Never store unused material in spreader. Return unused product to its original container. 2. Set rate slide on the highest number, open spreader and spin wheels to remove excess material. 3. Wash out hopper thoroughly after each use to remove material clinging to surfaces. Pay close attention to area between the shutoff bar and the hopper.