Scotts ACCUGREEN 2000 75345 User Manual

AccuGreen2000 Hang Tag 3/28/01 11:01 AM Page 1
Calibration
Your AccuGreen 2000 Spreader was calibrated at
® TM
the factory. You may check the calibration as follows:
1.
Adjust the micrometer setting to 6.
2.
Squeeze the trigger against the handle.
3.
The front edge of the shutoff bar should be
aligned with the calibration line engraved on the
bottom of the hopper.
4.
To adjust alignment, use a small wrench to turn the
black calibration screw at the lower end of the control
wire leading from the micrometer insert.
Spend a few minutes on
maintenance after each use
1.
Never leave product in the spreader. Pour leftover material
back into the package and seal the package tightly.
2.
After each use, wash thoroughly to remove all material
clinging to the spreader. Hot water may be
required at times to remove stubborn residue.
Allow the spreader to dry thoroughly in the sun.
3.
Store your spreader in a clean dry place.
NOTE: This unit does not require lubrication
Thank you
for purchasing a Scotts AccuGreen 2000 spreader. The Scotts Company
® ® TM
introduced the first home lawn spreader in 1946 and has continued to offer
superior quality that translates into more accurate application, a better-
looking lawn, and a longer-lasting, more durable spreader. The lawn care
industry's most extensive research, design, and testing have gone into
making the AccuGreen series spreaders the most accurate in their class. With
its durable rustproof hopper, the
AccuGreen
Questions, Comments, Information guaranteed to give you great
results — now and for many years
to come.
Call Scotts' toll- free "Lawn Success Made Easy" ™
Consumer Helpline: Visit Scotts' website at
ACCUGREEN 2000
1-800-543-TURF www.scottslawn.com
Scotts No-Quibble
Guarantee
®
If for any reason you, the consumer, are not satisfied
after using this product, you are entitled to get your
money back. Simply send us evidence of purchase
and we will mail you a refund check promptly.
The Scotts Company
14111 Scottslawn Rd.
®
Marysville, Ohio 43041
01-AG2000 Printed in USA Printed on Recyled Paper ©2001, The Scotts Company. World rights reserved.
SHUTOFF
BAR
CALIBRATION
LINE
• Accurate application of lawn products
• U-shaped handle with fingertip
on/off control
• Precision micrometer rate setting
• Mid-Size hopper holds more than
7,500-square-feet of Scotts fertilizer
2000 spreader is
® TM
• 18-inch spread width
• Easy-rolling 12-inch wheels for stability
and maneuverability
75345
• Rustproof hopper, agitator
and polymer components
• Scotts No-Quibble
STRIP IN UPC CODE
0 32247 75345 6
Guarantee
• Made in the U.S.A.
PROOF OF PURCHASE
INSTRUCTIONS INSIDE —SAVE FOR FUTURE REFERENCE
DROP SPREADER
Ready to use!
No assembly!
The Scotts Difference
®
H E L P L
® U M E R
C O N S
I N E