Whirlpool WMH53521HZ Installation Instructions Manual page 5

6. Using diagonal wire cutting pliers, gently snip out the
rectangular damper vent covers at the perforations.
A
A. Diagonal wire cutting pliers
B. Rectangular damper vent cover
7. Hold the blower motor wire, put the wire through the blower
motor bridge.
A. Blower motor bridge
B. Blower motor wire
8. Lower blower motor back into the microwave oven. Exhaust
ports face the back of the microwave oven.
A. Exhaust Port
9. Reconnect the blower motor wire into the connector.
A. Blower motor wire
B. Connector
B
A
B
A
A
B
10. Reattach the two blower screws into the recessed holes in
the back of the microwave.
A
A. Screws
B. Recessed holes
11. Check to make sure the two screws are secured properly in
the blower motor screw holes, so that the motor cannot
move.
A
B
A. Screws
B. Blower motor screw holes
12. Return the damper plate to its original horizontal position.
A
A. Damper plate
B
5