Candeo C302-WF Quick Start Manual

Candeo Rotary Wifi Dimmer Switch - C302-WF
This dimmer is a Wifi rotary dimmer switch for
dimmable LED lamps.
The minimum brightness setting of the dimmer
can be adjusted to achieve the optimum
dimming range for a particular load, as detailed
in the Minimum Brightness Setting section.
Please read all of the instructions.
Specifications
Input Voltage
Power Load
Minimum Load per
lamp
Dimmer Mode
Control Method
Features
• Wifi AC phase cut dimmer for use with Tuya Smart Ecosystem (Smart Life app)
• 220V-240V AC Input and Output Voltage
• Supports resistive loads and capacitive loads
• Trailing Edge and Leading Edge modes
• Enables ON/OFF control and dimming of connected dimmable led lights or led drivers
• No neutral required
• Minimum brightness configurable
• Soft Start
• Noiseless dimming
• Waterproof grade: IP20
Safety Warnings and notes
• Turn Off Mains Power before installing the device
• Certain light sources may not behave according to the power rating when used with a dimmer. An overload
will result in the safety features switching the dimmer off. We recommend only using this dimmer within the
suggested load, and with high quality dimmable bulbs.
• Please ensure that your bulbs or lamps are minimum 5W and the total load is minimum 10W. Results may
vary with low quality bulbs or lamps, and with a low power load you may need to fit a bypass on the first
lamp in the circuit.
220V-240V ~ 50Hz
RL (Leading Edge): 10-100VA LED
RC (Trailing Edge): 10-200VA LED
10-200W Halogen
5W
Trailing Edge, Leading Edge
Smart control / multi-way switching
C302-WF
Do not dispose of with household
waste
Do not expose the product to
moisture or liquids
Do not attempt to open the
product to examine or repair.
This product is designed for
indoor use only.