1. Manuals
  2. Brands
  3. KLR Manuals
  4. Packaging equipment
  5. 5051
  6. Manual

KLR 5051 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KLR.5051
Serial numbers: 2415 - beyond

TABLE OF CONTENTS

0.0: REVISIONS NOTICES ............................................................................................................................... 4
1.0: SAFETY PRECAUTIONS ............................................................................................................................ 5
2.0: IDENTIFICATION ..................................................................................................................................... 7
2.1: Product brand and type designation: ................................................................................................ 7
2.2: Name and manufacturer contact: ..................................................................................................... 7
3.0: PRODUCT SPECIFICATION ...................................................................................................................... 8
3.1: Right or left version ............................................................................................................................ 8
3.2: General functions intended use:........................................................................................................ 9
3.3: Dimensions for transport ................................................................................................................... 9
3.4: Power data - Electricity and Pneumatic ............................................................................................ 9
3.4.1: Electricity data ............................................................................................................................ 9
3.4.2: Pneumatic data ........................................................................................................................... 9
3.5: Safety specification ............................................................................................................................ 9
3.5.1: Emergency button....................................................................................................................... 9
3.5.2: Sliding door ............................................................................................................................... 10
3.5.3: Safety light curtain .................................................................................................................... 10
.................................................................................................................................................................... 11
4.0: OPERATION KLR.5051 .......................................................................................................................... 11
4.1: Main screen (Operational mode) ..................................................................................................... 11
4.2: Procedure for start up...................................................................................................................... 11
4.2.1: Choosing recipes ....................................................................................................................... 11
4.2.2: Bag table adjustment ................................................................................................................ 12
4.2.3: Plate height adjustment ............................................................................................................ 12
4.2.4: Infeed guides adjustment ......................................................................................................... 13
4.2.5: Outfeed guides adjustment ...................................................................................................... 13
4.2.6: filling bag ................................................................................................................................... 14
5.0: OPERATION KLR.5051-AB ..................................................................................................................... 15
5.1: Main screen (Operational mode) ..................................................................................................... 15
5.2: Procedure for start up...................................................................................................................... 15
5.2.1: Choosing recipes ....................................................................................................................... 15
5.2.2: Bag table adjustment ................................................................................................................ 16
Revision: 2022-11-25
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5051 and is the answer not in the manual?

Questions and answers

Related Manuals for KLR 5051

Summary of Contents for KLR 5051

  • Page 1: Table Of Contents

    3.5.1: Emergency button........................9 3.5.2: Sliding door ..........................10 3.5.3: Safety light curtain ........................10 ..................................11 4.0: OPERATION KLR.5051 .......................... 11 4.1: Main screen (Operational mode) ..................... 11 4.2: Procedure for start up........................11 4.2.1: Choosing recipes ........................11 4.2.2: Bag table adjustment ........................
  • Page 2 9.2.1: Greasing ports ........................... 52 9.2.2: Retract plates ..........................53 9.2.3: Scoop rails ..........................54 9.2.4: Bag inputs module ........................55 9.2.5: Bag sensor programming ......................59 9.2.5: Servo belt ..........................61 9.4: Stepper motor assembly for KLR.5051 .................... 63...
  • Page 3 10.0: LISTS OF SPARE PARTS AND CONSUMABLES ..................72 10.1: KLR.5051 ............................72 10.2: KLR.5051-AB ........................... 73 11.0: Maintenance and repairs by specialized technicians from KLR Systems Inc........74 11.1: Contact information ........................74 12.0: DECOMMISSIONING OF THE MACHINE ..................... 74 13.0: KLR.5051-L AND KLR.5051-L-AB EXPLOSED VIEWS ................
  • Page 4 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.15.1: Retract lifter stepper motor for KLR.5051-X-AB ..............92 13.16: Bag table feeder ........................... 93 13.17: Bag table back side ........................94 13.18: Bag holder ............................ 95 13.19: Sliding door ..........................96...

  • Page 5: Revisions Notices

    Download program for stepper motor for KLR.5051-AB. 2022-11-25: Exploded views added. Spare parts list updated. 2022-08-24: Deep switches resolution setting for KLR.5051 (9.4.2) is now explained in more details. 2022-08-23: Clarified the wiring part of integrated stepper motor 9.4 and 9.5.

  • Page 6: Safety Precautions

     Any modifications with any aspect of the mechanical, safety, electrical design, design, or any parts connected with the equipment will void the warranty and liability of KLR Systems. If a change is required, you should contact KLR Systems for approval. All technical handling must be done by a qualified technician or by KLR Systems;...
  • Page 7  Safety switches: DO NOT bypass any safety components for any reason. Violation will void all guaranties and responsibility from KLR Systems. If a safety switch is broken, the machine will not start, but the safety switch must be replaced before starting the machine;...

  • Page 8: Identification

    KLR.5051 (Schneider) KLR.5051-AB (Allen Bradley) Serial number and specification location: On the support of the touch screen. KLR.5051-L (Left version) picture 2A 2.2: Name and manufacturer contact: KLR SYSTEMS INC. Packaging systems manufacturer Address: 944 rue des Hérons, City, province, Country: Saint-Pie, Québec, Canada...

  • Page 9: Product Specification

    Standing on the operator side of the machine (able to work with the touch screen) and looking toward the direction of products. The hand closer to the machine tells what version (right or left). KLR.5051 (Basic) Left outfeed Right outfeed...

  • Page 10: General Functions Intended Use

    Height: 55" Length: 132" Width: 57" 3.4: Power data – Electricity and Pneumatic 3.4.1: Electricity data See serial number specification for specific voltage since KLR offer different voltage options. 3.4.2: Pneumatic data Flow: 5 CFM Pressure: 80 PSI 3.5: Safety specification 3.5.1: Emergency button...

  • Page 11: 2: Sliding Door

    Safety switch Sliding door Latch clamp KLR.5051-L (left version) picture 3C 3.5.3: Safety light curtain Since the bag input module is adjustable from front to rear, it creates a gap. If operator passing his hand thought the gap, the light curtain stops instantly the moving parts inside the machine. However, the conveyors do not stop because it does not represent a danger in that case.

  • Page 12: Operation Klr.5051

    Height setting indicator Recipe Send recipe KLR.5051 screen picture 4A selection Once the power turned ON, the machine and the main page appears, follow these steps to start the bagger (refer to the "Procedure for startup" section for more information): 4.2: Procedure for start up...

  • Page 13: 2: Bag Table Adjustment

    It is important to select the recipe first. See "Choosing recipe". Look at the value for BAG TABLE measurement on the display (1), Pull up the bag table latch (2) and adjust according to the measure (3). Secure with the bag table latch. KLR.5051-L (left version) picture 4E KLR.5051 screen picture 4D KLR.5051-L (left version) picture 4F 4.2.3: Plate height adjustment...

  • Page 14: 4: Infeed Guides Adjustment

    The numbers on the scale are in inches. Adjust a little bit bigger to the product size. Scale indicator Adjustment crank KLR.5051-L (left version) picture 4I 4.2.5: Outfeed guides adjustment Adjust the back gauge on the outfeed conveyor so the products sit on the belt as close as possible to the bag closing machine without shifting on the side.

  • Page 15: 6: Filling Bag

    The following drawing is for a left version, A right version is a mirror of this. Theoretical center Never used KLR.5051-L bag input module picture 4N 3. Press LOAD BAGS. KLR.5051 screen picture 4O KLR.5051 screen picture 4P...

  • Page 16: Operation Klr.5051-Ab

    Height setting Next page reference KLR.5051-X-AB screen picture 5A Bag/minute Once the power turned ON, the machine and the main page appears, follow these steps to start the bagger (refer to the "Procedure for startup" section for more information): 5.2: Procedure for start up...

  • Page 17: 2: Bag Table Adjustment

    It is important to select the recipe first. See "Choosing recipe". Look at the value for BAG TABLE measurement on the display (1), Pull up the bag table latch (2) and adjust according to the measure (3). Secure with the bag table latch. KLR.5051-L-AB (left version) picture 5E KLR.5051-X-AB screen picture 5D KLR.5051-L-AB (left version) picture 5F 5.2.3: Plate height adjustment...

  • Page 18: 4: Infeed Guides Adjustment

    Scale indicator Adjustment crank KLR.5051-X-AB screen picture 5I KLR.5051-L-AB (left version) picture 5J 5.2.5: Outfeed guides adjustment Adjust the back gauge on the outfeed conveyor so the products sit on the belt as close as possible to the bag closing machine without shifting on the side. If needed, fine tune on production.

  • Page 19: 6: Filling Bag

    The following drawing is for a left version, A right version is a mirror of this. Theoretical center Never used KLR.5051-L-AB bag input module picture 5Q 3. Press LOAD BAGS. KLR.5051-X-AB screen picture 5R KLR.5051-X-AB screen picture 5S...

  • Page 20: Recipe Setting Page Klr.5051

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 6.0: RECIPE SETTING PAGE KLR.5051 It is possible to adjust parameters to the point of a malfunction of the packaging  machine. Exercise caution when making parameter changes and make changes in small increments.

  • Page 21: 3: Two Step Motions

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond Deg: Stand for degree. A bagging start at 0deg and end at 360deg thus create a pattern cycle. The machine has an intern clock that keep cycling thought 360 degrees, which every action is made during that period.
  • Page 22 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond It tells the machine how fast the plate comes back to the homing position after the bagging sequence picture 6E Height Value given to ''the up/down motor'' to raise the top plate at the height value during the bagging sequence.
  • Page 23 If the bag tail has tearing, lower that value. On the other hands, if you have cuts on top of the bag caused by the belts, you might lower too quickly. KLR.5051-L (Left version) picture 6G Hold bag (deg) The value is in degree, which a bagging cycle start at 0deg and end at 360deg.
  • Page 24 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond Scoop opening (in) This value tells the scoop how wide it needs to open. The value is in inches and should be set a bit bigger than the product size. Only the bottom scoops are controlled, the top ones will be opened by the product itself.
  • Page 25 In that case, increase "Stop infeed delay (ms)". Infeed conveyor KLR.5051-L (Left version) picture 6K Restart infeed (deg) The value is in degree, which a bagging cycle start at 0deg and end at 360deg. When the plates have traveled back to their 0 position, the machine waits this value before starting back the infeed conveyor.
  • Page 26 Infeed conveyor Prefeed conveyor Stop infeed delay (ms) KLR.5051-L (Left version) picture 6L Two step restarts (deg) When set to 0, the function is disabled, and the machine will skip the first step and go to the full distance. But as long that there is a lower value then the full distance, the machine will do a 2 step motions each cycle.
  • Page 27 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond Plate return (deg) The value is in degree, which a bagging cycle start at 0deg and end at 360deg. The parameter basically tells the machine how long to stay fully extended (full distance).
  • Page 28 Usually, sealer method requires a slower speed then a clip method. Outfeed conveyor KLR.5051-LR (right outfeed) picture 6M.2 Retract belt speed Speed of the retract belt in hertz. Raise the number to raise the speed. A speed too high would make the product arrives before the moment the scoops open.
  • Page 29 Prefeed conveyor Infeed conveyor Stop prefeed delay (ms) KLR.5051-L (Left version) picture 6N Pack per minute This parameter is configuring the speed of the intern degree clock which relate to every parameter set in degrees. Take note that raising the number make it quicker but does not necessarily make the bagger bag quicker.
  • Page 30 If the value on the right has excided 360 degrees, it will show for example 003. That means that the intern clock is too fast. KLR.5051 screen picture 6P Delay flattener (ms) Flattener is an option dedicated to flatten properly the bag before it goes into a sealer device.
  • Page 31 Top manual crank KLR.5051 screen picture 6R KLR.5051-L (Left version) picture 6S Bag table position Value appearing on the main screen according to that recipe. Value to communicate to the operators on change over.

  • Page 32: Recipe Setting Page Klr.5051-Ab

    It is possible to adjust parameters to the point of a malfunction of the packaging  machine. Exercise caution when making parameter changes and make changes in small increments. See recipe manager for KLR.5051-AB to save your recipe and be able to keep track of your changes. 7.1: Unlock advance parameters Advanced Settings must be unlocked by pressing Log on (1), select the recipe desired to be modified (2) and press SEND (3).

  • Page 33: 2: Acronyms

    Step 1 Step 2 Bottom plate No two step motions picture 7C 7.3: Bag management To reach bag management, the machine must be unlocked with a valid username and password. See "Unlock advanced parameters". Press Bag management. KLR.5051-X-AB screen picture 7D...
  • Page 34 If the bag tail has tearing, lower that value. On the other hands, if you have cuts on top of the bag caused by the belts, you might lower too quickly. KLR.5051-L (Left version) picture 7F...

  • Page 35: Bagger Stroke

    If the value is too early, the belts while turning will bring some bag with it on the way back. KLR.5051-L (Left version) picture 7G Check for product (deg) On the way reverse (back), the machine will go check if a product is already waiting to be bagged. If there is in fact one ready, it will for example: allowed blower to start, keep the retract belt ongoing.
  • Page 36 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond Pack per minute This parameter is configuring the speed of the intern degree clock which relate to every parameter set in degrees. Take note that raising the number make it quicker but does not necessarily make the bagger bag quicker.
  • Page 37 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond Plate full position (in) ABS Distance in inches where the mechanism at the end of forward movement. The dimension the value must be set according to where to deposit the product onto the outfeed conveyor. Typically set so the product sits on the edge of the conveyor to get closed or sealed.
  • Page 38 The value is in degree, which a bagging cycle start at 0deg and end at 360deg. When the retract system is on the way back, this parameter stand for when the machine is allowed to send the next product. Infeed conveyor KLR.5051-L (Left version) picture 7N...

  • Page 39: Infeed Management

    To reach bag management, the machine must be unlocked with a valid username and password. See "Unlock advanced parameters". Press Infeed management. KLR.5051-X-AB screen picture 7O Prefeed speed and Infeed speed Speed of the prefeed and infeed conveyor respectively. There are two speed which this conveyor will use: Regular and stacking.
  • Page 40 Prefeed conveyor Infeed conveyor Stop prefeed delay (ms) KLR.5051-L (Left version) picture 7R Infeed launch delay The value is in degree, which a bagging cycle start at 0deg and end at 360deg. Unlike Infeed launch next product is for when the machine is allowed to send the next product, Infeed launch delay is the...

  • Page 41: Motor Speed

    Infeed sensor Infeed conveyor Prefeed conveyor Stop infeed delay (ms) KLR.5051-L (Left version) picture 7S 7.6: Motor speed To reach bag management, the machine must be unlocked with a valid username and password. See "Unlock advanced parameters". Press motor speed.

  • Page 42: Bag Table

    Usually, sealer method requires a slower speed then a clip method. Outfeed conveyor KLR.5051-LR (right outfeed) picture 7U Retract belt speed Speed of the retract belt in hertz. Raise the number to raise the speed. A speed too high would make the product arrives before the moment the scoops open.
  • Page 43 Serial numbers: 2415 – beyond Speed up The value will tell the machine how fast to raise the bag lifter. KLR.5051-L (Left version) picture 7W Speed down The value will tell the machine how fast to lower the bag lifter.

  • Page 44: Scoop

    To reach bag management, the machine must be unlocked with a valid username and password. See "Unlock advanced parameters". Press Scoop. KLR.5051-X-AB screen picture 7Y Scoop open (Deg) The value is in degree, which a bagging cycle start at 0deg and end at 360deg. This value tells the scoops when to stop according to the intern clock.
  • Page 45 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond Scoop open 2 (Deg) The value is in degree, which a bagging cycle start at 0deg and end at 360deg. This value tells the scoops when to stop according to the intern clock. It only controls the bottom ones.
  • Page 46 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond Scoop up (deg) The value is in degree, which a bagging cycle start at 0deg and end at 360deg. This value tells the scoops when they need to raise. It only controls the top ones.

  • Page 47: Outfeed Management

    "Unlock advanced parameters". Press "Outfeed management". "Outfeed speed" has already been addressed in "Motors speeds" KLR.5051-X-AB screen picture 7FF Bag flatner OPT Bag flatner is an option of a nozzle that flatten the bag tail before closure. 1 = ON ; 0 = OFF.
  • Page 48 Scale indicator Adjustment crank KLR.5051-X-AB screen picture 7HH KLR.5051-L-AB (left version) picture 7II Plate height This is the adjustment communicated to operators of the machine via the touch screen. They can look at the value which translate to the crank display and they can perform a manual adjustment on it.
  • Page 49 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond Recipe name Enter a new name in the field to rename a recipe. Make sure to select the recipe that is required to change first. KLR.5051-X-AB screen picture 7OO...

  • Page 50: Recipe Manager Klr.5051

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 8.0: RECIPE MANAGER KLR.5051 Here is where to copy, rename and create new recipes. This also helps to track changes. Change pages Change pages KLR.5051 screen picture 8A Create a new recipe: ...

  • Page 51: Maintenance

    Serial numbers: 2415 – beyond 9.0: MAINTENANCE  Before doing the maintenance on the equipment, every operator and maintenance personnel should take part in a training session given by a KLR systems technician. 9.1: Preventive maintenance schedules Due to the complexity of our machine, these procedures are subject to change and should be adequately adjusted in extreme conditions.
  • Page 52 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond TROUBLESHOOTING PREVENTIVE MAINTENANCE SCHEDULE Location Procedure Time Possible causes Remarks interval Retract Test the retract lifter arms. Monthly Bearing wear, not If there is restriction, plates Raise it by hand up and let it...

  • Page 53: Maintenance Steps

    Note: The pictures have been taken from the back perspective for clarity purpose only. The grease ports are accessible via the sliding door. Pillow bearings KLR.5051-L (Left version) picture 9A Retract lifter shaft KLR.5051-L (Left version) picture 9B Retract linear bearings...

  • Page 54: 2: Retract Plates

    Wipe linear rails if old dirty grease. Inspect the linear rails for any burr. Grease the two (2) linear bearings. Linear rails KLR.5051-L (Left version) picture 9C – Some parts have been removed for clarity – 9.2.2: Retract plates Test the retract lifter arm by moving up and down by hands. Three (3) bearings.

  • Page 55: 3: Scoop Rails

    This inspection must be done by manually placing the retract system at the beginning and at the end of the tracks. Verify the wear of the plastic rollers. Make sure there is no flat spot and they turn freely. Plastic rollers (2) Rails (2) KLR.5051-L (Left version) picture 9E...

  • Page 56: 4: Bag Inputs Module

    1. Turn off the power and put a pad lock device for safety. 2. Remove all those screws and remove the cover by sliding on the side. KLR.5051-L (Left version) picture 6F KLR.5051-L (Left version) picture 9G 3. Remove the belt. Inspect the plastic gears and inspect if there is leak on the gearbox. For reinstall, see "Timing of plastic gear"...
  • Page 57 4. The bag support can be removed for more accessibility. Bag support KLR.5051-L (Left version) picture 9I 5. Disconnect the bag lifter motor, remove the 4 screws, and pull out the motor. Careful, the weight section will fall. Inspect the racks and pinion. On reinstall, take care of timing the system properly.
  • Page 58 Revision: 2022-11-25 Serial numbers: 2415 – beyond 9.2.4.1: Timing of bag lifter weight (No weight on KLR.5051-L-AB and KLR.5051-R-AB) When the bag table is at the lowest, make sure there is minimal space in between the weight rack and the aluminum fixture. Also, it must be minimal space in between the weight and the motor body.
  • Page 59 Otherwise, it restrains the maximum movement. Simply orient both backlash gears completely one side (does not matter if it is in or out) and then reinstall the belt. Backlash slots KLR.5051-L (Left version) picture 9L – Some parts have been removed for clarity –...

  • Page 60: 5: Bag Sensor Programming

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 9.2.5: Bag sensor programming See "Bag input module" to know how to get to the sensor. On power up, display will show: Bag sensor picture 6M 9.2.5.1: Reset to default 1. While pressing on DOWN, press five (5) times on UP. A question will then display.
  • Page 61 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 9.2.5.2: Teach the bag sensor Note: On this model, no need to select PNP or NPN. 1. With nothing in front of the sensor, press the TEACH button for 3 seconds (until the SET flashes in the display).

  • Page 62: 5: Servo Belt

    2. Verify the tracking is correct. The belt must NOT touch on either side on all position of the system. Servo belt KLR.5051-L (Left version) picture 6L 9.2.5.1: Servo belt tension 1. Remove rear panel. 2. Loosen slightly the two (2) hex screws.
  • Page 63 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 3. Adjust tension via the adjustment screw. Adjustment screw...

  • Page 64: Stepper Motor Assembly For Klr.5051

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 9.4: Stepper motor assembly for KLR.5051 The KLR.5051 has at least 6 stepper motors. PE-01538 PE-01533 9.4.1: Wiring 9.4.1.1: Integrated stepper drive The integrated stepper drive must follow this wiring: Unipolar stepper motor...
  • Page 65 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 9.4.1.2: Wire from motor to the control panel Brown Blue Green Brown Black Blue and green Blanc Red (Not used) White Black...

  • Page 66: 2: Dip Switch Resolution Setting

    B.T. up/down Right aligner (option) 1/16 Left aligner (option) 1/16 On the drive, there are two (2) set of DIP switches which it can configure into five (5) different resolution: Manufacturer default setting Under Faceplate Used in the KLR.5051 Full 1/16...

  • Page 67: Stepper Motor For Klr.5051-X-Ab

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 9.5: Stepper motor for KLR.5051-X-AB Prior replacing a Lexium Mdrive stepper motor (PE-00628), it is required to be programmed. Download and use the Lexium software suite. It does not require a license and it is completely free to use. Please, use version 1.0.1.8 or above.

  • Page 68: 3: Led Indicators Description

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 9.5.2.1: Wire in a bench test (programming purpose) Lexium Mdrive stepper motor (PE-00628) coils are intended to operate, in normal condition, at 48VDC. But the integrated drive on the motor support 24VDC as well for programming.

  • Page 69: 4: Set Ipv4 Address Of The Computer

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 9.5.4: Set IPv4 address of the computer The machine has two (2) IP address which one is used locally in electrical box, and one used to connect to the infrastructure (including connecting to a secure VPN). By default, the local IP address is the same through all the machines.
  • Page 70 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 4. Double click on Internet protocol TCP/IPv4. 5. Click on Use this IP address. 6. Insert an IP address that match the default IP address of the motor.

  • Page 71: 5: Lexium Software Suite

    Serial numbers: 2415 – beyond 9.5.5: Lexium Software Suite Procedure to program the stepper motor is coming soon. Contact support at KLR. 9.6: Error messages on KLR.5051-X-AB In an event a motor gets faulted, the user will be warned by a sign. By pressing on it, it will reveal what error it is in question.
  • Page 72 KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond...

  • Page 73: Lists Of Spare Parts And Consumables

    There are multiple options available for your machine. If you need to order a piece, make sure to look in the correct list. If you need assistance, see contact information. 10.1: KLR.5051 Suggested spare part list per machine for KLR.5051-X KLR.5051-SPARE Numbers...

  • Page 74: Klr.5051-Ab

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 10.2: KLR.5051-AB Suggested spare part list per machine for KLR.5051-X-AB KLR.5051-SPARE-AB Numbers Part numbers Quantity Descriptions PB-00519-4-WH RETRACT BELT 5051 – 4.00" x 115" WHITE PO2-00133 CIRCLIP BEARING PP-00521 VALVE 2 POSITIONS – 24VDC – DIN...

  • Page 75: Maintenance And Repairs By Specialized Technicians From Klr Systems Inc

    Phone: 450-388-0404 Web site: http://klrsystems.com/ Technical support Email: support@klrsystems.com For other information: info@klrsystems.com 12.0: DECOMMISSIONING OF THE MACHINE It is advisable to schedule a visit from KLR to reinstall the equipment after an extended decommissioning or relocation. Destruction, recycling, scrapping...

  • Page 76: Klr.5051-L And Klr.5051-L-Ab Explosed Views

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.0: KLR.5051-L AND KLR.5051-L-AB EXPLOSED VIEWS...

  • Page 77: Main Body

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.1: Main body...

  • Page 78: Covers

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.2: Covers...

  • Page 79: Infeed Tunnel

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.3: Infeed tunnel...

  • Page 80: Infeed Conveyor

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.4: Infeed conveyor KLR.5051-X-AB KLR.5051-X-AB...

  • Page 81: 1: Prefeed Stepper Motor For Klr.5051-X-Ab

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.4.1: Prefeed stepper motor for KLR.5051-X-AB...

  • Page 82: Bottom Scoop Frame

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.5: Bottom scoop frame...

  • Page 83: Bottom Scoop Motor Drive

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.6: Bottom scoop motor drive...

  • Page 84: Bottom Scoop

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.7: Bottom scoop...

  • Page 85: Upper Scoop

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.8: Upper scoop...

  • Page 86: Retract Lifter

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.9: Retract lifter KLR.5051-X KLR.5051-X-AB...

  • Page 87: Retract Motors

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.10: Retract motors...

  • Page 88: Slanted Guard

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.11: Slanted guard...

  • Page 89: Pneumatic

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.12: Pneumatic...

  • Page 90: Servo Motor

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.13: Servo motor KLR.5051-X-AB...

  • Page 91: Bag Table Frame

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.14: Bag table frame...

  • Page 92: Bag Table Lifter

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.15: Bag table lifter KLR.5051-X-AB...

  • Page 93: 1: Retract Lifter Stepper Motor For Klr.5051-X-Ab

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.15.1: Retract lifter stepper motor for KLR.5051-X-AB...

  • Page 94: Bag Table Feeder

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.16: Bag table feeder KLR.5051-X-AB KLR.5051-X...

  • Page 95: Bag Table Back Side

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.17: Bag table back side...

  • Page 96: Bag Holder

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.18: Bag holder...

  • Page 97: Sliding Door

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.19: Sliding door...

  • Page 98: Control Panel

    KLR.5051 Revision: 2022-11-25 Serial numbers: 2415 – beyond 13.20: Control panel KLR.5051-X KLR.5051-X-AB...

This manual is also suitable for:

2415

Table of Contents