Getting Started; Batteries; Switch Between Modes; Change Settings - Oregon Scientific PSS01A User Manual

GETTING STARTED

BATTERIES

Batteries are supplied with this product. Replace them
whenever the low battery signal ( ) displays. Remove the
compartment lid on the bottom of the unit. Be sure to
match the correct polarity, as shown in the battery
compartment. Before you close the lid, press the RESET
button with the point of a blunt object (such as a ball point
pen).
NOTE Do not use rechargeable batteries.

SWITCH BETWEEN MODES

Press SELECT. The selected mode will flash. The display
will stop flashing if no key is pressed within 5 seconds.

CHANGE SETTINGS

Press and hold SELECT for 2 seconds. Then, press UP
or DOWN to change each setting. Press SELECT to
switch between options.

CLOCK

This product can automatically synchronize the date and
time with official time-keeping organizations in Frankfurt,
Germany (PS-S01) or Rugby, England (PS-S01U). When
the unit is within 1500 km (932 miles) of a RF signal, the
reception icon will blink during reception.
6