Advertisement
For Implanted Patients
Patient MRI Checklist
At your MRI appointment:
Bring your patient ID card and remote control to your MRI appointment.
Your MRI Tech will confirm your impedance check results before your MRI scan.
Turn your stimulation OFF using your remote control.
After your MRI appointment:
After your MRI scan, turn your stimulation back ON by pressing the Stimulation Start/Increase Button
after turning your remote control ON (page 16).
Contact your Nevro HFX Care Team to make sure your device is programmed to your pre-MRI settings.
Note: HFX and HFX iQ are approved for an MRI scan under certain conditions. Different models of implanted devices, including lead types, result in different
approved scanning conditions. Please review the Nevro HFX MRI Guidelines carefully with your Nevro HFX Care Team before getting an MRI scan.
20
Advertisement
