Advertisement
Determine the Number of Lights Needed and the Spacing
Directions
1. Use a measuring wheel to determine the length of the perimeter of the area to
be illuminated.
2. The lights should be roughly 15' apart. Divide the perimeter by 15.
3. Round that number UP to the nearest whole number.
That is the number of lights needed.
4. Divide the perimeter by the number of lights.
That is how far apart the lights should be installed.
Figure 2
(not to scale)
Notes Before Installing
Before installing the Twilight Golf Post lights, it is important to keep two things in mind during the installation planning.
Direction
Before backfilling the hole, rotate the STAKE in the
ground so the notch points towards the center of the
desired illuminated area.
!
WARNING: Do not rotate light post once
inserted as this may damage the unit.
(See Figures 8 and 9 for lamp head adjustment.)
Figure 3
alignment notch
2
352'
Level
Before backfilling, use a bubble level to confirm the TWGP-
STAKE is level in the ground. This ensures the light will come out
of the ground at 90˚.
Figure 4
Example
Perimeter measures 352'.
Divide 352 by 15.
Equals 23.46.
Round 23.46 up to 24.
Divide 352 by 24.
Equals: 14.7´.
bubble level
Advertisement
