Advertisement
CHRONOGRAPH MODE
The Chronograph counts up in 1/100 second resolution with working range of 24 hours.
S4
S3
- Press S3 to Chronograph mode.
- Press S1 for start/stop operation. "RUN" is shown for counting, and "STP" is shown for stop counting.
- Press S2 (twice if necessary in stop mode) to reset the chronograph to zero.
- Press S2 to view the split time when the Chronograph is counting. "SPL" is shown, and the colon is flashing. Press S2
to release split time and return to running chronograph.
- Press S1 to stop Chronograph running then press S2 to reset Chronograph to zero.
TIMER MODE
Timer mode presents the preset time at the upper row and the current count down time at the lower row.
"CS"- Count Down Stop.
"Cr"- Count Down Repeat.
The working range of the timer is 60 minutes and the resolution is 1 second.
- Press S3 to Timer mode.
- Press S1 for start/stop operation.
S4
S3
COUNT DOWN STOP
SETTING TIMER
- Press S3 to Timer mode
- Press S1 for start/stop operation.
- Press S2 while the timer is in stop mode for setting timer. The setting digits start flashing.
- Press S1 to forward the setting digit.
- Press S3 to exit.
SELECT TIMER
- Press S2 twice to select timer when the Timer is in stop mode. "CS"/ "Cr" start flashing.
- Press S1 to toggle "CS" or "Cr".
- Press S3 to exit.
HiGlo BACK LIGHT
- Press S1 for HiGlo back light with 3 seconds auto light up.
BATTERY REPLACEMENT
- Open the bottom case.
- Replace two SR936W cells.
S1
S2
S1
S4
S2
S3
COUNT DOWN REPEAT
S1
S2
3
Advertisement
