Table of Contents
Advertisement
58
EN
A/ B CO D E
Downloaded from:
https://www.usersmanualguide.com/
PO W ER
1
2
3
4
5
6
7
8
9
0
SPECIAL FEATU RES (cont.)
Control Tw o JVC VCRs
The supplied remote control is capable of controlling two J VC
VCRs independently using the A/ B CO D E switch. You can set this
VCR so it responds to remote commands only when the switch is
set to B , and another VCR so it responds to commands when the
switch is set to A . The switch is preset to A because this VCR
normally responds to A-code signals. Follow steps 1 – 4 to set this
VCR to respond to B-code commands.
UN PLUG VCR' S PO W ER
CO RD
Unplug from the AC outlet.
1
SET A/ B CO DE SW ITCH
Set the A/ B CO D E switch on the remote control to B.
2
PLUG IN PO W ER CO RD
Plug back in to the AC outlet.
3
TURN VCR PO W ER O N
Press PO W ER on the remote.
4
The VCR will now respond only to B-code commands.
To set the VCR to respond to A code signals again, repeat the
above procedures setting the A/ B CO D E switch to A, instead of
B, in step 2 .
You can control two VCRs with the same remote control by
switching the remote's code between A and B.
Advertisement
Table of Contents
